Overview DescriptionFree up space and secure power cords between rack-mount PDUs and attached IT equipment with this exclusive easy-to-use cord retention method. While these cords will fit into any standard IEC receptacle or power inlet; the "locking" feature is enabled only when used with APC AP8000 series Rack PDUs or IT equipment with built-in locking receptacles. These locking connectors reduce the probability of accidentally disconnecting cords and dropping loads. Model NamePower Cord, Locking C19 to BS1363A (UK), 3.0m Standard Lead TimeUsually in Stock Output Nominal Output Voltage240V Maximum Total Current Draw per Phase13 A Output Connections(1) IEC 320 C19 (Battery Backup) Cord Length10 Input Input ConnectionsBritish BS1363A Cord Length3 meters Number of Power Cords1 Maximum Line Current per phase13 A Maximum Input Current per phase13 A Physical Net Weight0.44 kg Maximum Height230.0 mm Maximum Width230.0 mm Maximum Depth50.0 mm Shipping Weight0.44 kg Shipping Height230.0 mm Shipping Width230.0 mm Shipping Depth50.0 mm ColorBlack Environmental Operating Environment0 - 70 °C Operating Relative Humidity20 - 80 % Operating Elevation0-3000 meters Storage Temperature-20 - 70 °C Storage Relative Humidity20 - 80 % Storage Elevation0-15000 meters Conformance ApprovalsBSI 1363 , VDE Standard warranty2 years repair or replace Sustainable Offer Status RoHSCompliant REACHREACH: Contains No SVHCs
CatalogueFormatSizeAdd to My DocumentsEnd of Life InformationFormatSizeAdd to My Documents
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.