Main range compatibilityLexium 32i product or component typeServo motor with power stage device short nameBMI Complementary maximum mechanical speed8000 rpm [Us] rated supply voltage208...480 V - 15...10 % supply voltage limits208…480 V network number of phasesThree phase supply frequency50/60 Hz - 5...5 % network frequency limits47.5…63 Hz EMC filterIntegrated continuous output current2 A at 8 kHz output current 3s peak6 A at 400 V for 3 s continuous stall current2 A continuous stall torque2.48 N.m at 208...480 V three phase peak stall torque6.8 N.m at 208 V three phase6.8 N.m at 400 V three phase6.8 N.m at 480 V three phase nominal output power400 W at 208 V three phase800 W at 400 V three phase900 W at 480 V three phase nominal torque2.4 N.m at 208 V three phase2.2 N.m at 400 V three phase2 N.m at 480 V three phase nominal speed1800 rpm at 208 V three phase3600 rpm at 400 V three phase4400 rpm at 480 V three phase maximum current Irms9.6 A at 208 V, three phase9.6 A at 400 V, three phase9.6 A at 480 V, three phase product compatibilityDrive control unit LXM32i CANopenDrive control unit LXM32i EtherCAT shaft endUntapped second shaftWithout second shaft end shaft diameter11 mm shaft length23 mm feedback typeAbsolute single turn SinCos Hiperface speed feedback resolution131072 points/turn holding brakeWithout mounting supportInternational standard flange motor flange size70 mm electrical connectionPrinted circuit board connector torque constant1.15 N.m/A at 20 °C back emf constant77.18 V/krpm at 20 °C number of motor poles10 rotor inertia1.13 kg.cm² stator resistance8.89 Ohm at 20 °C stator inductance25.75 mH at 20 °C stator electrical time constant2.9 ms at 20 °C maximum radial force Fr710 N at 1000 rpm560 N at 2000 rpm490 N at 3000 rpm450 N at 4000 rpm410 N at 5000 rpm390 N at 6000 rpm maximum axial force Fa0.2 x Fr type of coolingNatural convection length268 mm number of motor stacks2 centring collar diameter60 mm centring collar depth2.5 mm number of mounting holes4 mounting holes diameter5.5 mm circle diameter of the mounting holes75…82 mm distance shaft shoulder-flange2.5 mm Environment IP degree of protectionShaft: IP54Housing: IP65 Offer Sustainability Sustainable offer statusGreen Premium product REACh Regulation EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity Profile WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins Contractual warranty Warranty18 months
User guideFormatSizeAdd to My DocumentsSize pdfSize 10.5 MBDate 01/10/18DescriptionThis manual describes technical characteristics, installation, commissioning, operation and maintenance of the integrated servo drive system Lexium 32i ECT + BMi.Size pdfSize 11.1 MBDate 01/10/18DescriptionThis manual describes technical characteristics, installation, commissioning, operation and maintenance of the integrated servo drive system Lexium 32i CAN + BMi.EU RoHS DeclarationFormatSizeAdd to My DocumentsProduct Environmental ProfileFormatSizeAdd to My DocumentsREACh DeclarationFormatSizeAdd to My Documents
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.