Main range of productTeSys D rangeTeSys product or component typeContactor device short nameLC1D contactor applicationMotor controlResistive load utilisation categoryAC-2AC-3AC-4AC-1 control circuit typeAC at 50/60 Hz poles description3P pole contact composition3 NO [Ie] rated operational current40 A (at <60 °C) at <= 440 V AC AC-3 for power circuit60 A (at <60 °C) at <= 440 V AC AC-1 for power circuit motor power kW18.5 kW at 380...400 V AC 50 Hz22 kW at 500 V AC 50 Hz30 kW at 660...690 V AC 50 Hz11 kW at 220...230 V AC 50 Hz22 kW at 415 V AC 50 Hz22 kW at 440 V AC 50 Hz22 kW at 1000 V AC 50 Hz Complementary coil technologyWithout built-in bidirectional peak limiting diode suppressor protective coverWith motor power hp3 hp at 115 V AC 60 Hz for 1 phase motors5 hp at 230/240 V AC 60 Hz for 1 phase motors10 hp at 200/208 V AC 60 Hz for 3 phases motors10 hp at 230/240 V AC 60 Hz for 3 phases motors30 hp at 460/480 V AC 60 Hz for 3 phases motors30 hp at 575/600 V AC 60 Hz for 3 phases motors auxiliary contacts typetype mechanically linked 1 NO + 1 NC conforming to IEC 60947-5-1 type mirror contact 1 NC conforming to IEC 60947-4-1 auxiliary contact composition1 NO + 1 NC [Uc] control circuit voltage400 V AC 50/60 Hz control circuit voltage limitsDrop-out: 0.3...0.6 Uc at 50/60 Hz (at <60 °C)Operational: 0.8...1.1 Uc at 50 Hz (at <60 °C)Operational: 0.85...1.1 Uc at 60 Hz (at <60 °C) [Ui] rated insulation voltageControl circuit: 600 V CSA certifiedControl circuit: 600 V UL certifiedPower circuit: 600 V CSA certifiedPower circuit: 600 V UL certifiedControl circuit: 690 V conforming to IEC 60947-1Power circuit: 690 V conforming to IEC 60947-1 [Uimp] rated impulse withstand voltage8 kV conforming to IEC 60947 overvoltage categoryIII mounting supportPlateRail flame retardanceV1 conforming to UL 94 connections - terminalsControl circuit: screw clamp terminals 1 cable(s) 1…4 mm²rigidControl circuit: screw clamp terminals 2 cable(s) 1…4 mm²rigidControl circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable endControl circuit: screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable endControl circuit: screw clamp terminals 1 cable(s) 1…2.5 mm²flexible with cable endControl circuit: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable endPower circuit: screw terminals 1 cable(s) 2.5…25 mm²rigidPower circuit: screw terminals 2 cable(s) 2.5…16 mm²rigidPower circuit: screw terminals 1 cable(s) 2.5…25 mm²flexible without cable endPower circuit: screw terminals 2 cable(s) 2.5…16 mm²flexible without cable endPower circuit: screw terminals 1 cable(s) 2.5…25 mm²flexible with cable endPower circuit: screw terminals 2 cable(s) 2.5…10 mm²flexible with cable end tightening torqueControl circuit: 1.2 N.m - on screw clamp terminal - with screwdriver flat Ø 6 mmControl circuit: 1.2 N.m - on screw clamp terminal - with screwdriver Philips No 2Power circuit: 5 N.m - on screw terminal - with screwdriver flat Ø 6 to Ø 8 mm [Ue] rated operational voltagePower circuit: <= 690 V AC 25...400 Hz [Ith] conventional free air thermal current10 A (at 60 °C) for control circuit60 A (at 60 °C) for power circuit Irms rated making capacity800 A at 440 V for power circuit conforming to IEC 60947140 A AC for control circuit conforming to IEC 60947-5-1 rated breaking capacity800 A at 440 V for power circuit conforming to IEC 60947 associated fuse rating10 A gG for control circuit conforming to IEC 60947-5-180 A gG at <= 690 V coordination type 1 for power circuit80 A gG at <= 690 V coordination type 2 for power circuit power dissipation per pole5.4 W AC-12.4 W AC-3 inrush power in VA140 VA cos phi 0.75 (at 20 °C)160 VA cos phi 0.75 (at 20 °C) hold-in power consumption in VA13 VA 60 Hz cos phi 0.3 (at 20 °C)15 VA 50 Hz cos phi 0.3 (at 20 °C) operating time4...19 ms opening12...26 ms closing safety reliability levelB10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 mechanical durability6000000 cycles maximum operating rate3600 cyc/h 60 °C minimum switching current5 mA for control circuit minimum switching voltage17 V for control circuit non-overlap time1.5 ms on de-energisation between NC and NO contacts1.5 ms on energisation between NC and NO contacts insulation resistance> 10 MOhm for control circuit height127 mm width75 mm depth119 mm net weight1.4 kg Environment standardsIEC 60947-5-1EN 60947-4-1CSA C22.2 No 14UL 508IEC 60947-4-1EN 60947-5-1 product certificationsCCCULDNVBVCSAGLLROS (Lloyds register of shipping)RINAGOST IP degree of protectionIP2x conforming to IEC 60529IP2x conforming to VDE 0106 ambient air temperature for operation-5…60 °C ambient air temperature for storage-60…80 °C permissible ambient air temperature around the device-40…70 °C at Uc operating altitude3000 m without fire resistance850 °C conforming to IEC 60695-2-1 shock resistance10 gn contactor opened15 gn contactor closed vibration resistance2 gn 5…300 Hz contactor opened4 gn 5…300 Hz contactor closed heat dissipation4…5 W at 50/60 Hz for control circuit Offer Sustainability Sustainable offer statusGreen Premium product REACh Regulation EU RoHS DirectiveCompliant
EU RoHS Declaration
Toxic heavy metal freeYes Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity Profile WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins Contractual warranty Warranty18 months
EU RoHS DeclarationFormatSizeAdd to My DocumentsProduct Environmental ProfileFormatSizeAdd to My DocumentsREACh DeclarationFormatSizeAdd to My Documents
- All Languages7
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.