Main range of productHarmony XAC product or component typePendant control station device short nameXACA pistol grip Complementary control station typeDouble insulated enclosure materialPolypropylene control typeIntuitive electrical circuit typeControl circuit enclosure typeComplete ready for use control station applicationControl of single speed hoist motor control station composition2 push-buttons + 1 emergency stop control button typeFirst push-button 1 NO raise, slowSecond push-button 1 NO lower, slowEmergency stop push-button Ø 30 mm 1 NC trigger action product compatibilityZB2BE101 for each directionZB2BE102 for emergency stop mechanical interlockingWith mechanical interlocking control station colourYellow connections - terminalsScrew clamp terminals, 1 x 2.5 mm² with or without cable endScrew clamp terminals, 2 x 1.5 mm² with or without cable end standardsEN/IEC 60947-5-5EN/ISO 13850: 2006UL 508EN/IEC 60204-32EN/IEC 60947-5-1CSA C22.2 No 14 product certificationsULCSA protective treatmentTH ambient air temperature for operation-25…70 °C ambient air temperature for storage-40…70 °C vibration resistance15 gn (f= 10…500 Hz) conforming to IEC 60068-2-6 shock resistance100 gn conforming to IEC 60068-2-27 overvoltage categoryClass II conforming to IEC 61140 IP degree of protectionIP65 conforming to IEC 60529 IK degree of protectionIK08 conforming to EN 50102 mechanical durability1000000 cycles cable entryRubber sleeve with stepped entry 7…15 mm contact code designationA600 AC-15, Ue = 240 V, Ie = 3 A conforming to IEC 60947-5-1 appendix AA600 AC-15, Ue = 600 V, Ie = 1.2 A conforming to IEC 60947-5-1 appendix AQ600 DC-13, Ue = 250 V, Ie = 0.27 A conforming to IEC 60947-5-1 appendix AQ600 DC-13, Ue = 600 V, Ie = 0.1 A conforming to IEC 60947-5-1 appendix A [Ithe] conventional enclosed thermal current10 A [Ui] rated insulation voltage600 V (pollution degree 3) conforming to IEC 60947-1 [Uimp] rated impulse withstand voltage6 kV conforming to IEC 60947-1 contact operationSlow-break maximum resistance across terminals25 MOhm operating force13…15 N short-circuit protection10 A fuse protection by cartridge fuse type gG rated operational power in W40 W DC-13 for 1000000 cycles, operating rate <60 cyc/mn at 120 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C48 W DC-13 for 1000000 cycles, operating rate <60 cyc/mn at 48 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C65 W DC-13 for 1000000 cycles, operating rate <60 cyc/mn at 24 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C terminals description ISO n°1(13-14)NO terminals description ISO n°2(11-12)NC terminal identifier(11-12)NC(13-14)NO Contractual warranty Warranty18 months
Instruction sheetFormatSizeAdd to My Documents
- All Languages2
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.