Main range of productHarmony XAC product or component typePendant control station device short nameXACA Complementary control station typeDouble insulated enclosure materialPolypropylene electrical circuit typeControl circuit enclosure typeComplete ready for use control station applicationControl of 2-speed hoist motor control station composition4 push-buttons control button typeFirst push-button 1 NC + 2 NO raise, slow-fastSecond push-button 1 NC + 2 NO lower, slow-fastFourth push-button 1 NO left, slowThird push-button 1 NO right, slow product compatibilityXENG1191 for raise/lower directionZB2BE101 for right/left direction mechanical interlockingWith mechanical interlocking between pairs control station colourYellow connections - terminalsScrew clamp terminals, 1 x 0.5...1 x 2.5 mm² without cable endScrew clamp terminals, 1 x 0.5...2 x 1.5 mm² with cable end standardsUL 508CSA C22.2 No 14EN/IEC 60204-32EN/IEC 60947-5-1 product certificationsCCCGOST protective treatmentTH ambient air temperature for operation-25…70 °C ambient air temperature for storage-40…70 °C vibration resistance15 gn (f= 10…500 Hz) conforming to IEC 60068-2-6 shock resistance100 gn conforming to IEC 60068-2-27 overvoltage categoryClass II conforming to IEC 61140 IP degree of protectionIP65 conforming to IEC 60529 IK degree of protectionIK08 conforming to EN 50102 mechanical durability1000000 cycles cable entryRubber sleeve with stepped entry 8…26 mm contact code designationA600 AC-15, Ue = 240 V, Ie = 3 A conforming to IEC 60947-5-1 appendix AA600 AC-15, Ue = 600 V, Ie = 1.2 A conforming to IEC 60947-5-1 appendix AQ600 DC-13, Ue = 250 V, Ie = 0.27 A conforming to IEC 60947-5-1 appendix AQ600 DC-13, Ue = 600 V, Ie = 0.1 A conforming to IEC 60947-5-1 appendix A [Ithe] conventional enclosed thermal current10 A [Ui] rated insulation voltage600 V (pollution degree 3) [Uimp] rated impulse withstand voltage6 kV conforming to IEC 60947-1 contact operationStaggeredSlow-break maximum resistance across terminals25 MOhm operating force10 N emergency stop18 N push-button short-circuit protection10 A fuse protection by cartridge fuse type gG rated operational power in W40 W DC-13 for 1000000 cycles, operating rate <60 cyc/mn at 120 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C48 W DC-13 for 1000000 cycles, operating rate <60 cyc/mn at 48 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C65 W DC-13 for 1000000 cycles, operating rate <60 cyc/mn at 24 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C terminals description ISO n°1(21-22)NC(33-34)NO_CL(13-14)NO terminals description ISO n°2(13-14)NO terminal identifier(13-14)NO(11-12)NC net weight0.675 kg Offer Sustainability Sustainable offer statusGreen Premium product REACh Regulation REACh free of SVHCYes EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Toxic heavy metal freeYes Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity ProfileNo need of specific recycling operations WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins Contractual warranty Warranty18 months
Instruction sheetFormatSizeAdd to My DocumentsCADFormatSizeAdd to My DocumentsSize zipSize 128.3 KBDate 08/01/08CertificateFormatSizeAdd to My DocumentsDeclaration of conformityFormatSizeAdd to My DocumentsEU RoHS DeclarationFormatSizeAdd to My DocumentsProduct Environmental ProfileFormatSizeAdd to My DocumentsREACh DeclarationFormatSizeAdd to My Documents
- All Languages14
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.