Main range of productPreventa Safety automation product or component typePreventa safety module safety module nameXPSAK safety module applicationFor emergency stop, switch, sensing mat/edges or safety light curtain monitoring function of moduleProximity sensor monitoringEmergency stop monitoring 1-channel wiringMonitoring of electro-sensitive protection equipment (ESPE)Multiple emergency stop monitoring 2-channel wiringMonitoring of a movable guardSensing mat and edges monitoringEmergency stop with 2 NC contacts monitoring 2-channel wiringMonitoring of a movable guard associated with 2 switches and automatic start safety levelCan reach PL e/category 4 conforming to EN/ISO 13849-1Can reach SILCL 3 conforming to EN/IEC 62061 safety reliability dataDC > 99 % conforming to EN/ISO 13849-1MTTFd = 154.5 years conforming to EN/ISO 13849-1PFHd = 7.39E-9 1/h conforming to EN/IEC 62061 type of startConfigurable connections - terminalsCaptive screw clamp terminals, 1 x 0.14...1 x 2.5 mm² flexible with cable end, with double bezelCaptive screw clamp terminals, 1 x 0.14...1 x 2.5 mm² solid with cable end, with double bezelCaptive screw clamp terminals, 1 x 0.25...1 x 1.5 mm² flexible with cable end, with double bezelCaptive screw clamp terminals, 1 x 0.25...1 x 2.5 mm² flexible with cable end, with double bezelCaptive screw clamp terminals, 2 x 0.14...2 x 0.75 mm² flexible with cable end, with double bezelCaptive screw clamp terminals, 2 x 0.14...2 x 0.75 mm² solid with cable end, with double bezelCaptive screw clamp terminals, 2 x 0.25...2 x 1 mm² flexible with cable end, with double bezelCaptive screw clamp terminals, 2 x 0.5...2 x 1.5 mm² flexible with cable end, with double bezel output typeRelay instantaneous opening, 3 NO circuit(s), volt-free number of additional circuits1 NC + 4 solid state outputs [Us] rated supply voltage24 V AC - 15...10 %24 V DC - 15...10 % Complementary synchronisation time between inputsUnlimited (manual start)2 or 4 s depending of wiring (automatic start) supply frequency50/60 Hz maximum power consumption in VA5 VA AC input protection typeInternal, electronic [Uc] control circuit voltage24 V DC maximum line resistance28 Ohm breaking capacity180 VA holding AC-15 C300 relay output1800 VA inrush AC-15 C300 relay output breaking capacity1.5 A at 24 V (DC-13) time constant: 50 ms for relay output output thermal current6 A per relay for relay output [Ith] conventional free air thermal current18 A associated fuse rating4 A gG or gL for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 2006 A fast blow for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200 minimum output current10 mA for relay output minimum output voltage17 V for relay output maximum response time on input open40 ms [Ui] rated insulation voltage300 V (pollution degree 2) conforming to IEC 60947-5-1300 V (pollution degree 2) conforming to DIN VDE 0110 part 1 [Uimp] rated impulse withstand voltage4 kV overvoltage category III conforming to IEC 60947-5-14 kV overvoltage category III conforming to DIN VDE 0110 part 1 local signalling4 LEDs current consumption30 mA at 24 V AC on power supply mounting support35 mm symmetrical DIN rail net weight0.3 kg Environment standardsEN/ISO 13850EN 1088/ISO 14119EN/IEC 60947-5-1EN/IEC 60204-1 product certificationsCSAULTÜV IP degree of protectionIP20 (terminals) conforming to EN/IEC 60529IP40 (enclosure) conforming to EN/IEC 60529 ambient air temperature for operation-10…55 °C ambient air temperature for storage-25…85 °C Offer Sustainability Sustainable offer statusGreen Premium product REACh Regulation EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity Profile WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins Contractual warranty Warranty18 months
Documents and DownloadsLanguage
Instruction sheetSizeAdd to My DocumentsCADSizeAdd to My DocumentsCAD for XPSAK311144: module XPSAK - Emergency stop - 24 V AC DC (Version 1.0)CertificateSizeAdd to My DocumentsDeclaration of conformitySizeAdd to My DocumentsEnd of Life InformationSizeAdd to My DocumentsProduct Environmental ProfileSizeAdd to My Documents
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.