View all Schneider Legacy Products
module XPSEC - increasing the number of safety contacts - 24 V AC DCShow more characteristics
XPSECP5131XPSECP5131 has not been replaced. Please contact your customer care centre for more information.
Add to My Products Remove from My Products
The maximum number of products that can be compared is 4
Main range of productPreventa Safety automation product or component typePreventa safety module safety module nameXPSECP safety module applicationIncreasing the number of safety contacts function of moduleIncreasing the number of safety contacts safety levelCan reach PL e/category 4 can reach the maximum safety level of module base conforming to EN/ISO 13849-1Can reach SILCL 3 can reach the maximum safety level of module base conforming to EN/IEC 62061 safety reliability dataMTTFd = 346.2 years conforming to EN/ISO 13849-1DC = 0...90 % conforming to EN/ISO 13849-1PFHd = 7.51E-9 1/h conforming to EN/IEC 62061 output typeRelay, 8 NO circuit(s), volt-free [Us] rated supply voltage24 V AC - 20...10 %24 V DC - 20...20 % number of additional circuits1 NC + 1 solid state output Complementary supply frequency50/60 Hz maximum power consumption in VA5 VA input protection typeInternal, electronic breaking capacity360 VA holding AC-15 B300 relay output3600 VA inrush AC-15 B300 relay output breaking capacity1.5 A at 24 V (DC-13) time constant: 50 ms for relay output10 mA at 48 V for solid state output circuit20 mA at 24 V for solid state output circuit output thermal current6 A per relay for relay output [Ith] conventional free air thermal current30 A for relay output associated fuse rating6 A gG for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200 minimum output current10 mA for relay output minimum output voltage17 V for relay output maximum response time on input open20 ms [Ui] rated insulation voltage300 V (pollution degree 2) conforming to IEC 60947-5-1300 V (pollution degree 2) conforming to DIN VDE 0110 part 1 [Uimp] rated impulse withstand voltage4 kV overvoltage category III conforming to IEC 60947-5-14 kV overvoltage category III conforming to DIN VDE 0110 part 1 local signalling3 LEDs connections - terminalsCaptive screw clamp terminals, 1 x 4 mm² without cable endCaptive screw clamp terminals, 2 x 2.5 mm² with cable end mounting support35 mm symmetrical DIN rail net weight0.55 kg Environment standardsEN/IEC 60947-5-1EN/IEC 60204-1 product certificationsTÜVULCSA IP degree of protectionIP20 (terminals) conforming to EN/IEC 60529IP40 (enclosure) conforming to EN/IEC 60529 ambient air temperature for operation-10…55 °C ambient air temperature for storage-25…85 °C Contractual warranty Warranty18 months
CADSizeAdd to My DocumentsCAD for XPSECP5131: module XPSEC - increasing the number of safety contacts - 24 V AC DC (Version 1.0)
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.