Network Management Card 3 - User Guide

This document provides instructions for installing, configuring, operating, and troubleshooting the Network Management Card 3 models AP9640, AP9641, and AP9643. It covers network setup for IPv4 and IPv6, web user interface navigation, UPS monitoring and control, outlet group management, security configuration including authentication protocols, firmware updates, notification settings, and logging capabilities. The document includes detailed information on supported protocols such as SNMP, Modbus, BACnet, and EtherNet/IP, along with environmental monitoring features and PowerChute Network Shutdown integration. It provides step-by-step procedures for configuration tasks, troubleshooting guidance, and warranty information for UPS devices with embedded Network Management Card 3. Note: AI-generated document summary. Please check the original document for detailed information.

Network Management Card 3 - User Guide

Release date 01 Sept 2026
Version R
Document ref. SPD_CCON-AYCEFJ_EN
File format PDF (2.7 MB)
File name | Size | Action UG 990-91148R-EN.pdf 2.7 MB

Network Management Card 3 - User Guide

This document provides instructions for installing, configuring, operating, and troubleshooting the Network Management Card 3 models AP9640, AP9641, and AP9643. It covers network setup for IPv4 and

Release date 01 Sept 2026
Version R
Document ref. SPD_CCON-AYCEFJ_EN
File format PDF (2.7 MB)
UG 990-91148R-EN.pdf
Release date 01 Sept 2026
Version R
File name UG 990-91148R-EN.pdf
File format PDF