Browse FAQs

Why is the Advantys STBART0200 displaying a node error?

Published date: 16 August 2019

Advantys STBART0200 displaying  node error.

Product Line:

By default, both channels support three-wire IEC Pt100 RTD APS_SENSORS.
If the sensor is not connected to the channel, the module will detect a broken wire and flash an error on the LED

By using the Advantys Config Tool:
You may change the input sensor type on a per/channel basis to be one of several types of TC, mV, or RTD devices.
If you are not using a sensor on one of the channels, you may configure it as type "none".

Note: Broken wire detection is not provided for mV APS_SENSORS.


Was this helpful?

What can we do to improve the information ?

Can't find what you are looking for?

Reach out to our customer care team to receive information on technical support, assistance for complaints and more.