Browse FAQs

What can cause an E-flex drive to trip on No Sensor T fault?

Published date: 20 September 2019

Walmart E-flex drive is tripping on No Sensor T fault.

Product Line:
E-Flex Walmart Drive

Walmart Custom built drives only

Temperature sensor signal is out of range.

Power cycled the drive to see if the fault will reset. You will get No Sensor T fault if there is no temperature transmitter signal detected continuously for 15 minutes.

Also go into Menu 1.14 check the temperature ambient temp value. If there is no signal there or if the signal is out of range you may have a bad temp sensor.

Was this helpful?

What can we do to improve the information ?

Can't find what you are looking for?

Reach out to our customer care team to receive information on technical support, assistance for complaints and more.