Browse FAQs

ATO transfers when chiller load is on

Published date: 24 September 2019

When the switchgear/switchboard has chiller loads on, this causes the system to transfer.
This happens even when there is healthy voltage present as sensed from the 27/47 relays.

Product Line:
Crompton 27/47 relay

This is a good indication of harmonics at the customer site from the chiller loads.
The Crompton 27/47 relay is not tolerant of harmonics, and when the chillers are running this causes the Crompton relay to indicate an unhealthy voltage source, causing the system to transfer.

A solution could be to replace the Crompton relay with a more harmonic tolerant relay such as the Basler ES 27/47 relay, which is mounted via Din rail and is an easy replacement

Was this helpful?

What can we do to improve the information ?

Can't find what you are looking for?

Reach out to our customer care team to receive information on technical support, assistance for complaints and more.