Panelboards / Switchboards and Switchgear

240 Vac maximum Lighting and Appliance circuit protection With 100-600A bus capacities, and optional fingersafe IP2X construction, NQ panelboards offer compact, flexible protection for 10-200 A, 240 Vac maximum circuits.

Lighting and Appliance circuit protection up to 125A at 480Y/277 Vac With bus capacities from 125-800A, NF panelboards offer a wide variety of field installable circuit breakers and accessories, including 200% neutrals.

Lighting and power distribution panelboards ##

State-of-the-art in lighting panelboards. Measurement and Verification (MVP) from Schneider Electric provide the intelligent core to your energy management system. Providing true visibility into how your energy conservation measures are performing, even down to the branch circuit level.

Retrofit existing NF, NQ, Powerlink™, or other manufacturer's lighting/plug panel The Measurement and Verification Lighting Panelboard Retrofit (MVP-R) system is designed specifically with facility and energy managers in mind by allowing them to convert existing panelboards into branch-metered panels.

Monitor energy use by circuit, zone, or system and enjoy automated lighting and plug load control Powerlink Measurement and Verification Panelboards provide a simple, cost-effective and energy code compliant way to meter and control branch circuits from a standard panelboard.

Overcurrent protection, automated lighting controls, and plug load control from a standard sized panelboard. Energy savings, convenience and control all from a single compact solution

Panelboards that mount in W, H, or I-beam support columns Designed to fit into a standard size support column in industrial plants, NF & NQ column-width panelboards conserve wall space and protect the panels.

Energy Control Center (ECC) Combines electrical distribution equipment and industrial controls into an intelligent Power Management System (PMS) that is pre-wired, assembled & factory tested to deliver autonomous microgrid solutions managing multiple energy sources and prioritized loads.

Select a standard design that features popular options or a create a custom option switchboard QED-2 switchboards contain the quality, features, and innovations that allow for easier installation.

Short lead times. Meets EUSERC requirements. Designed for the EUSERC market, these switchboards offer a compact footprint, short lead time, and cost-effective solution for service entrance applications rated 400-800A. Available in standard or solar-ready configurations.

Low Voltage Drawout Switchgear with Masterpact Circuit Breakers ANSI rated to provide superior electrical distribution, protection, and power management in a space-efficient footprint. Masterpact NT/NW drawout power circuit breakers, deliver maximum up time, system selectivity, ease of maintenance, and reliable circuit protection.

Low voltage metal-enclosed, drawout switchgear designed to contain the effects of arc flash events inside the gear per ANSI/IEEE standard C37.20.7. This arc resistant solution features the proven reliability and durability of Masterpact NW power circuit breakers with a unique combination of arc flash mitigation features and upgraded arc flash containment, providing superior protection from the consequences of internal arcing faults.

For critical power distribution where it matters most Square D QED-6 Power-Style Rear Connected Electrical Switchboard is ideal for critical power distribution found in hospitals, universities, data processing centers and telecommunications facilities.

Single row and double row I-Line interior products Engineered to help you create high quality, custom switchboard layouts to meet your customers’ unique business needs.

Low Voltage Drawout Switchgear in 42-inch deep sections Greater footprint flexibility with reliable ANSI-rated power distribution.

The new generation of low-voltage switchboards

Accelerate time to market and reduce lead times for your customers with FlexSeT – a simplified, modular service model for switchboard design, sourcing, installation, and maintenance. UL listed, with ratings up to 2000A.

Panelboards that mount in W, H, or I-beam support columns Designed to fit into a standard size support column in industrial plants, NF & NQ column-width panelboards conserve wall space and protect the panels.

Ideal for service entrance equipment or downstream distribution panels in the electrical system of a large commercial or industrial facility I-Line™ power distribution panelboards feature Schneider Electric's unique circuit breaker engagement system and is used to feed NQ and NF lighting and appliance panelboards. I-Line panelboards are capable of feeding large motor loads and are UL Listed for use on systems with up to 200K max.

Combines I-Line and lighting sections in one panelboard. The I-Line™ Combo Panelboard saves time and space by combining I-Line and NQ/NF sections in one panelboard. The I-Line Combo Panelboard features a space-saving design for fast installation and a smaller footprint

Space-saving module for value-added digital solutions

Part of I-Line Series

Make your equipment future-ready with Square D I-Line™ Enable Module complete with a connected design that adds value to I-Line panelboard, is easy to install, easy to retrofit, and is completely customizable. The space-saving unit fits into the I-Line bus in place of a breaker and allows the I-Line panelboard to be transformed into a digital communication or metered electrical distribution solution.

Isolation Power Panel, incorporates the Square D products into the UL Listed NFPA 99 power system. Isolation Power System - small local network comprising an isolation transformer, a line isolation monitor, and its branch circuits.

Iso-Gard Series 6 Square D / Schneider Electric Iso-Gard Series 6, in full compliance of NFPA 99 requirements, for testing and monitoring of the Isolation Power Panels.

Accessories support the entire Isolated Power System Accessories help to support the entire Isolated Power System – power modules, ground modules, ground cords, nurse stations, and clock options.

Combines electrical distribution equipment and building management controls into a single factory-assembled and pre-wired integrated system For more complex applications, the Integrated Power Center (IPC) allows for the integration of a variety of components, including electrical distribution equipment, HVAC controls, lighting controls, power quality and power conditioning products, SPDs, building management systems and power metering/monitoring solutions. As with all Power Solutions Integrated Equipment products, the IPC is designed to meet applicable codes and standards and is available as seismically qualified.

Free-standing front and rear aligned integrated equipment that reduces footprint and lowers on-site installation costs. The newest addition to the family of Integrated Equipment products, the Integrated Power Center 2 (IPC2™) provides maximum flexibility to meet customers' specifications. Features include those found in the IPC and are provided in a free-standing enclosure that can be front and rear aligned when transformers are included. The IPC2 family is available as seismically-qualified.

Stay up and running even when the power is down. Reliable power connection solution to quickly and safely connect to a portable generator for standby power.

Combines several conventionally installed fueling controls into a single, integrated, space saving system. Solve fueling controls problems with a single, integrated solution

Automatic lighting controls in a single, integrated, space-saving solution Easily control lighting for energy and cost savings

Circuit breaker panelboard and fueling and lighting controls integrated into a single enclosure. Make the most of limited space with this integrated controls solution

Protect electronic equipment with clean, conditioned power The Power Manager minimizes damaging voltage spikes and power ripples and provides clean, conditioned power to your electronic loads. Avoid issues such as computer lock-ups, lost data, equipment damage, and downtime.

Engineered Mission Critical Power Custom-configured and manufactured to meet the complex emergency and prime power requirements of mission-critical facilities, the ASCO 7000 SERIES Paralleling Switchgear platform is designed, manufactured and thoroughly tested and certified to the toughest global standards, for operations of all sizes and requirements.