CatalogLanguageFormatSizeDateEnglishprp.document.label.format pdfSize 5.2 MBDate 6/14/19DescriptionTable of Contents: Introduction, Basic Energy Metering (IEM3000 series), Basic multi-function metering (PM3000, PM5000, ION6200, EM3500, and EM4200 series), Intermediate Metering (PM8000 series), Advanced metering (ION7550, ION7650 series, CM4000T, ION9000 series), Advanced utility metering (ION7550, ION8650 series), Multi-circuit metering (BCPM, EM4900, EM4000, and EM4800), Communications (Link150, Com'X 210, Com'X 510, and ION7550 RTU), and Monitoring software EcoStruxure power management softwareUser guideLanguageFormatSizeDate
Software - ReleasedLanguageFormatSizeDateEnglishprp.document.label.format zipSize 20.2 MBDate 11/30/11DescriptionThe Download Firmware Upgrade Utility (DLF3000) is a tool used to install the latest firmware version for your POWERLOGIC or POWERLINK device. After downloading DLF-3000 v3_3 v2.exe, do the following to install DLF3000: 1.Uninstall earlier versions of DLF. 1a.On your Windows taskbar, click Start > Settings > Control Panel. 1b.Click the Add/Remove Programs icon. Select the DLF program and remove it. 2.Navigate to the folder DLF-3000 v3_3 v2.exe is located, then double-click the file and follow the setup wizard. 3.When the installation is complete, reboot your PC.FirmwareLanguageFormatSizeDateEnglishprp.document.label.format zipSize 13.1 KBDate 3/5/13DescriptionUse the DLF-3000 software utility to apply this firmware to the device. The meter must be put in "Language Pack Download Mode". To do this, at the front panel of the meter do the following steps: (1) Press ESC and OK keys simulaneously to get to "Config" (2) Enter Password and then press OK (3) Click the down arrow key to scroll downward in the choices in the menu items in the left hand pane until you reach "LangDL". (4) Under "LangDL", select OK to "Enable Download". (5) After step (4) above, the meter is in LangDL mode. The LED at the top right corner of the front panel will glow yellow in this state. (6) Now, the meter will accept the Language Pack download from DLF3000 software. It will indicate "Passed" instead of "Firmware/Hardware Incompatibility".