PowerLogic PM5000 series
Compact, versatile meters for energy cost and basic network management applications
Part of PowerLogic
High-end cost management capabilities in an affordable meter. Maximize energy cost savings, optimize operational efficiency, and improve business performance.
CatalogLanguageFormatSizeDateEnglishprp.document.label.format pdfSize 1.9 MBDate 5/14/20DescriptionDigest Catalog Section 4 - (Digest 178) provides selection information for PowerLogic monitoring software, power quality meters, power and energy meters, data loggers, and ethernet gateways. Information for PowerLogic engineering services and support services. Replaces Digest 177 section 4; 0100CT1501_SEC-04Englishprp.document.label.format pdfSize 5.2 MBDate 6/14/19DescriptionTable of Contents: Introduction, Basic Energy Metering (IEM3000 series), Basic multi-function metering (PM3000, PM5000, ION6200, EM3500, and EM4200 series), Intermediate Metering (PM8000 series), Advanced metering (ION7550, ION7650 series, CM4000T, ION9000 series), Advanced utility metering (ION7550, ION8650 series), Multi-circuit metering (BCPM, EM4900, EM4000, and EM4800), Communications (Link150, Com'X 210, Com'X 510, and ION7550 RTU), and Monitoring software EcoStruxure power management softwareUser guideLanguageFormatSizeDate
FirmwareLanguageFormatSizeDateEnglishprp.document.label.format zipSize 3.3 MBDate 2/1/19DescriptionThe DNP3 protocol support over Ethernet is available in firmware version 2.7.4 and above for PM5560, PM5563 and PM5563RD meter models.The Distributed Network Protocol Version 3.0 (DNP3) is a multipoint communication protocol which specifies the coding of data and rules for exchanging data between a slave device and a master control device. DNP3 isan open protocol which can be implemented on any communication device. The DNP3 is available on Ethernet communication.