CatalogLanguageFormatSizeDateEnglishprp.document.label.format pdfSize 1.9 MBDate 5/14/20DescriptionDigest Catalog Section 4 - (Digest 178) provides selection information for PowerLogic monitoring software, power quality meters, power and energy meters, data loggers, and ethernet gateways. Information for PowerLogic engineering services and support services. Replaces Digest 177 section 4; 0100CT1501_SEC-04Englishprp.document.label.format pdfSize 5.2 MBDate 6/14/19DescriptionTable of Contents: Introduction, Basic Energy Metering (IEM3000 series), Basic multi-function metering (PM3000, PM5000, ION6200, EM3500, and EM4200 series), Intermediate Metering (PM8000 series), Advanced metering (ION7550, ION7650 series, CM4000T, ION9000 series), Advanced utility metering (ION7550, ION8650 series), Multi-circuit metering (BCPM, EM4900, EM4000, and EM4800), Communications (Link150, Com'X 210, Com'X 510, and ION7550 RTU), and Monitoring software EcoStruxure power management softwareUser guideLanguageFormatSizeDateEnglishprp.document.label.format pdfSize 112.4 KBDate 9/1/19DescriptionThis technical note outlines the compliance of applicable PowerLogic meters with the International Electrotechnical Commission’s IEC 61000-4-30 (or “4-30”) standard, and is intended for personnelwith knowledge of power quality and power quality standards.
Software - ReleasedLanguageFormatSizeDateEnglishprp.document.label.format zipSize 1.8 MBDate 7/27/16DescriptionPlease find in the attached .zip file OfflineMeter executables for the PM8000. Offline Meters, or meter simulators, are used on your Windows PC to emulate the meter hardware platform for the development and testing of meter application logic (a.k.a ION frameworks) using either ION Setup software or ION Enterprise Designer. Once the meter simulator is running, it can be accessed at the domain name "localhost" (127.0.0.1) with software on the same computer.Software - UpdatesLanguageFormatSizeDateFirmwareLanguageFormatSizeDateEnglishprp.document.label.format zipSize 17.9 MBDate 11/22/19Files in documentzip16.8 MB942.2 KB161.9 KBDescription"This ZIP file contains the files to upgrade the PowerLogic™ PM8000 series meter to firmware v2.2.1 (V002.002.001), Meter Template, Modbus Map document, SNMP MIB, Webpages, What’s new document and other associated files. See the Upgrading Meter Firmware to v2.2.1 document for important information on performing this upgrade. Verify the checksum of the file to help ensure it was not corrupted during download using the SHA-256 File Signature for the ION9000_V002.002.001.zip file: b659d628b5e5b3fc93edb0c04403367a7bf32f54a06d6b779cb2939850b1153f. NOTE: To apply this firmware, the meter must have firmware v2.1.0. Go to schneider-electric.com and search for Upgrade devices to firmware v 2.1.0 and follow instructions on how to get and apply firmware v2.1.0."Englishprp.document.label.format zipSize 14.2 MBDate 6/4/19Files in document97.7 KBdcf863.7 KBzip434.8 KBupg12 MBzip790.9 KBmib19.9 KBDescriptionThis Release brings serveral new features and security enchancements.The security enhancements include improvement to:- Syslog server support- Designated readera nd user information in the event log- Enabling/disabling communications ports and protocols and changing port numbers- Advanced security username and password entry when using the display- New user permission setting- Increase number of users in Advanced SecurityThe new communication functionality improvements include:- DHCP- Domain name resolution (DNS)- IPv6 full supportIncreased onboard log storage capacityWebpage waveform viewerPM8000_MID_V001.004.003.upg SHA-256 checksum:7cf3f0de7ffd13aff4fa6bb6b8da167718860e883006f774860f35a5fa177877Englishprp.document.label.format zipSize 16.9 MBDate 4/30/19Files in documentDescriptionFirmware version 2.1.0 for the PowerLogic™ PM8000 MID series meter adds enhanced firmware upgrade support, PTP, Secure HTTPS webserver, ION Module updates, updated support for the latest versions of EN50160, IEEE 519 and IEC 61000-4-30 power quality standards, pre- and post-event data capture for data and waveform recorders, and 0-20 mA support for the Analog I/O option module.To upgrade your meter to firmware version 2.1.0, you must use ION Setup version 3.1 or later. Please refer to the “Upgrading devices to firmware v2.1.0” technical note at https://www.se.com/ww/en/download/document/7EN72-0203/ for instructions on upgrading your meter firmware to version 2.1.0.SHA256 File signatures:c683f844c0225102d71b527c257ed5fee62603502bf150499ea65b9d139a1c95 *PM8000_MID_V002.001.000.zipEnglishprp.document.label.format zipSize 28.7 MBDate 3/4/19Files in document166.7 KB286 KBzip28.2 MBDescriptionFirmware version 2.1.0 for the PowerLogic™ PM8000 series meter adds enhanced firmware upgrade support, PTP, Secure HTTPS webserver, ION Module updates, updated support for the latest versions of EN50160, IEEE 519 and IEC 61000-4-30 power quality standards, pre- and post-event data capture for data and waveform recorders, and 0-20 mA support for the Analog I/O option module.To upgrade your meter to firmware version 2.1.0, you must use ION Setup version 3.1 or later. Please refer to the “Upgrading devices to firmware v2.1.0” technical note at https://www.se.com/ww/en/download/document/7EN72-0203/ for instructions on upgrading your meter firmware to version 2.1.0.SHA256 File signatures:3cdd6e69bfa85d8b76255391270db77f504ec77385bd2dfbc3c7f6b62f31c097 *PM8000_V002.001.000.zipEnglishprp.document.label.format binSize 5.6 MBDate 10/16/18DescriptionThis is OS Package version 3.2.193 for the METSEPM89RD96 remote display. It supports PowerLogic™ PM8000 and ION74000 series meters with firmware versions 1.4.x and older.See the Power Meter user manual for display firmware upgrade instructions.Note: This remote display OS Package is not compatible with meters running firmware versions 2.0.0 and newer.SHA256 File signatures:c55b87fda044cc5def860129c460d87f6c57560868315f4454306c8a49efef67 *rmdupg_rd96.003.002.193.binEnglishprp.document.label.format zipSize 24.1 MBDate 3/6/18Files in document97.7 KBdcf706.3 KBdcf863.7 KBtxt700 Bzip434.8 KBxlsx226.2 KBexe9 MBupg12 MBzip790.9 KBmib19.9 KBDescriptionFirmware version v1.4.3 for the PowerLogic™ PM8000 series meter is a maintenance release and resolves a previously unknown issue with firmware version v1.4.1. It includes the v1.4.1 features and enhancements: - Modbus product ID - Security Enhancements - Extended logging capability beyond the current 10MB limit. - Waveform Viewer on Webpage - DHCP over IPv4 and IPv6 - High Speed Relative Setpoints - Further IPv6 protocol support.SHA256 File Checksums:7969b53cfd7b6ddde30bee2a9f3eaa5b31a030f89fd2a70bdbae4e5fd1da0863 *PM8000_V001.004.003.upg5181555e259a571a81590f878ef1b98875906d023330c79bbe9aebd595154a6a *PM8000_webpages_001.004.003.zip700d6c7f31878ad73910f532d55b3ef5db6e0060b678cd3074686fa039314427 *8000_v1.4.0_FAC-PQ_V184.108.40.206.0.dcf784702f5b5263f4f101332dafb52f9905a83072e4a51edac24dddcd3abc7384b *8000_v1.4.0_FAC-519_V220.127.116.11.0.dcffc7a302296a95c75dab21473870456fd71c1f7867b2b20696b7fbbfe04422e75 *PM8000_simulator_Release_001.004.003.exed65b1007d40814ea8edf4a67986e02f3feee232a5b32f5c048ec91df69b6e433 *PM8xxxSchneiderMIB_customer.mib81385b59214b705a1b31d90e0fd345793d38f51184b3cb9c6fabfc619bf86afd *PM8000_Modbus_Map_001.004.000.xlsxEnglishprp.document.label.format zipSize 7.7 MBDate 8/19/16DescriptionFirmware version v1.3.1 for the PowerLogic™ PM8000 series meter adds a new feature that provides automatic temperature compensation for your meter’s internal clock. This firmware also resolves a previously unknown issue with firmware version v1.3.0. Features added from the previous firmware version include IPv6 global addressing and IPv6 gateway support.