Thalassa PLA

FS polyester enclosures & accessories

• Parts of the body, rear panels and doors are made from fiberglass reinforced polyester, molded by hot compression, RAL7032 colour. Same finish for all surfaces.
• Bosses for fixation points are molded.
• Four versions of enclosures :
  - Totally closed, IP65.
  - Open bottom and integrated plinth, IP54.
  - Open upper part for ventilation, IP44.
  - Open bottom and plinth, and open upper part for ventilation, IP44.
• Accessory to upgrade IP44 to IP54.
• 40 dimensions from 500x500x320mm up to 1500x1250x420mm.
• 1 door, 500 and 750mm width, and 2 doors, 1000 and 1250mm width.
• 2 doors enclosures constructed with reinforcement central part.
• 3 types of panels or doors: plain, ribbed surface for anti-flyposting, glazed.
• Lock or handle with locks, with 2 or 4 action points out of the protected volume.
• Impact resistance: IK10 for plain and ribbed door version, IK08 for the glazed door.
• Self- extinguishability: HB40 classified and 960º test withstanding.
• Certification of compliance with IEC62208 enclosure standard.
• UL/CUL certification.
• Polyester plinth ZA 200 mm, stackable 2x200mm,  for PLA enclosures, closed bottom versions
• Polyester plinth ZZ 200 mm and 500 mm for PLA enclosures, open bottom versions  

Schneider Electric selected a wide variety of spare parts for your enclosure.  No matter if the enclosure is recently built or has several years, you can have the replacement parts you need.

Floor-standing polyester enclosure

• No electrical contact risks.
• Suitable for indoor or outdoor use.
• Resistant to harsh atmospheres.
• Can be used in a large temperature range.
• Easy to machine and the machining does not produce corrosion.
• Halogen free.
• Light weight gives an easy installation.
• Long life lasting without maintenance.
• Strong against shocks.
• Version with canopy, for outdoor use, maintaining the quality of the seal.
• Version with 65mm integrated plinth and open lower part for easy incoming of cables.
• Large range of dimensions (40 dimensions !).
• Choice of doors (plain, ribbed anti flyposting surface, glazed).
• Several possibilities of installation (ground, on plinth, wall).
• Coupling possibilities thanks to modular dimensions.
• Locking system is out the protected volume.
• Abroad number of composition accessories.
• Mounting plates (metal or insulating material) or chassis for universal use or applications (VDI, modular distribution).
• Customised service: color, machining, mounting accessories, change of locks, enhanced depth.
• Combination of the 4 versions with the 3 types of door and rear door instead of panel.

Plinths ZM 200 mm

• Protection against the rise of water - access - cable management

• Energy distribution and Control in Energy Infrastructures, industry markets, installed indoor or outdoor, harsh conditions or environments and to avoid electrical risks.