power supply module Modicon Quantum - 48..60 V DC - summableShow more characteristics
Product availabilityNon-Stock - Not normally stocked in distribution facility
Main range of productModicon Quantum automation platform product or component typePower supply module power supply typeSummable Complementary input voltage48...60 V 48...60 V) DC input current3800 mA inrush current14 A 40 V maximum input power interruption13 ms 48 V associated fuse rating2 A, time-lag output voltage5.1 V DC power supply output current8 A summable output overvoltage protectionInternal output overload protectionInternal power dissipation15.6 W alarm output1 NC 6 A 220 V power supply fault local signallingPower (PWR OK) 1 LED green) markingCE module formatStandard net weight1.43 lb(US) (0.65 kg) Environment standardsUL 508CSA C22.2 No 142 product certificationsCUL resistance to electrostatic discharge4 kV contact IEC 801-28 kV on air IEC 801-2 resistance to electromagnetic fields9.14 V/m (10 V/m) 80…2000 MHz IEC 801-3 ambient air temperature for operation32…140 °F (0…60 °C) ambient air temperature for storage-40…185 °F (-40…85 °C) relative humidity95 % without condensation operating altitude<= 16404.2 ft (5000 m) Ordering and shipping details Category18155 - QUANTUM I/O & POWER SUPPLIES Discount SchedulePC21 GTIN00785901147435 ReturnabilityNo Country of originCN Offer Sustainability Sustainable offer statusGreen Premium product California proposition 65WARNING: This product can expose you to chemicals including: Lead and lead compounds which is known to the State of California to cause Carcinogen & Reproductive harm. For more information go to www.p65warnings.ca.gov EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity Profile WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. Contractual warranty Warranty18 months
User guideFormatSizeAdd to My DocumentsCADFormatSizeAdd to My Documentsprp.document.label.format zipSize 139.8 KBDate 5/19/20prp.document.label.format zipSize 332.3 KBDate 4/29/09CertificateFormatSizeAdd to My DocumentsInstruction SheetFormatSizeAdd to My DocumentsChina RoHS declarationFormatSizeAdd to My DocumentsDeclaration of conformityFormatSizeAdd to My DocumentsEnd of Life InformationFormatSizeAdd to My DocumentsEU RoHS DeclarationFormatSizeAdd to My DocumentsMarine certificateFormatSizeAdd to My DocumentsProduct Environmental ProfileFormatSizeAdd to My Documents
- All Languages29
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsRacks for Modules MountingDimensions of Modules and Racks(1)2 slots(2)3 slots(3)4 slots(4)6 slots(5)10 slots(6)16 slots
Connections and Schema48 Vdc/8 A Summable Power Supply ModuleWiring Diagram
NOTE: A normally closed relay contact rated at 220 Vac, 6A / 30 Vdc, 5A is available on terminals 1 and 2 of the power terminal strip. This contact set may be used to signal input power OFF, or a power supply failure.Operating Curve and Hold-up Capacitor Timing Chart
NOTE: Tolerance to input interruptions may be increased by adding a ≥ 80 Vdc electrolytic capacitor between 5 and 6 of the power terminal strip. Refer to the hold-up capacitor timing chart (above) for capacitor values.