sub-base - soldered electromechanical relays ABE7 - 8 channels - relay 5 mmShow more characteristics
Main range of productModicon ABE7 product or component typeElectromechanical output relay sub-base [Us] rated supply voltage24 V DC PLC end number of channels8 connections - terminalsScrew type terminals, 1 x 0.09...1 x 1.5 mm² AWG 28...AWG 16) flexible with cable endScrew type terminals, 1 x 0.14...1 x 2.5 mm² AWG 26...AWG 12) solidScrew type terminals, 1 x 0.14...1 x 2.5 mm² AWG 26...AWG 14) flexible without cable endScrew type terminals, 2 x 0.09...2 x 0.75 mm² AWG 28...AWG 20) flexible with cable endScrew type terminals, 2 x 0.2...2 x 2.5 mm² AWG 24...AWG 14) solid relay typeLatching Complementary terminal block typeRemovable supply voltage limits30 V DC PLC end) polarity distributionVolt-free protection typeInternal fuse 1 A 5 x 20 mm fast blow PLC endAdjustable by external fuse high breaking capacity preactuator end fixing modeBy clips 35 mm symmetrical DIN rail)By screws solid plate with fixing kit) width4.92 in (125 mm) current per channel2 A preactuator end minimum switching current2 mA >= 5 V threshold tripping voltage19.2 V 104 °F (40 °C) maximum power dissipation per channel in W0.3 W PLC end) contacts type and composition1 NO preactuator end maximum switching voltage380 V AC 50/60 Hz IEC 60947-5-1220 V DC IEC 60947-5-1 electrical durability500000 cycles 1500 mA 24 V DC-13 10 ms preactuator end)500000 cycles 1000 mA 230 V AC-15 preactuator end)500000 cycles 2000 mA 230 V AC-12 preactuator end)500000 cycles 2000 mA 24 V DC-12 preactuator end) electrical reliability2e-006 operating time<= 4 ms coil de-energisation and NO opening<= 5 ms coil energisation and NO closing contact bounce time<= 2 ms 1 NO operating rate in Hz3 Hz no load0.5 Hz at Ie mechanical durability20000000 cycles [Uimp] rated impulse withstand voltage5 kV IEC 60947-1 [Ui] rated insulation voltage2000 V installation categoryII IEC 60664-1 tightening torque5.31 lbf.in (0.6 N.m) flat Ø 3.5 mm net weight0.99 lb(US) (0.448 kg) Environment max immunity to microbreaks3 ms dielectric strength2000 V IEC 60947-1 product certificationsCSALROS (Lloyds register of shipping)BVDNVULGL IP degree of protectionIP2x IEC 60529 resistance to incandescent wire1382 °F (750 °C) 30 s IEC 60695-2-11 vibration resistance2 gn 10…150 Hz)IEC 60068-2-6 resistance to electrostatic discharge4 kV contact) level 3 IEC 61000-4-28 kV air) level 3 IEC 61000-4-2 resistance to radiated fields9.14 V/m (10 V/m) 26000000…1000000000 Hz)IEC 61000-4-3 level 3 resistance to fast transients2 kV level 3 IEC 61000-4-4 ambient air temperature for operation23…140 °F (-5…60 °C) IEC 61131-2 ambient air temperature for storage-40…176 °F (-40…80 °C) IEC 61131-2 pollution degree2 IEC 60664-1 Ordering and shipping details Category22375-INTERFACE MODULE(ABA,R,S) Discount ScheduleCP2 GTIN03389110251081 Package weight(Lbs)0.71 lb(US) (0.322 kg) ReturnabilityNo Country of originLV Offer Sustainability Sustainable offer statusGreen Premium product California proposition 65WARNING: This product can expose you to chemicals including: Lead and lead compounds which is known to the State of California to cause Carcinogen & Reproductive harm. For more information go to www.p65warnings.ca.gov REACh Regulation REACh free of SVHCYes EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity Profile WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. Contractual warranty Warranty18 months
CatalogFormatSizeAdd to My DocumentsCatalog PagesFormatSizeAdd to My DocumentsEnd of Life InformationFormatSizeAdd to My DocumentsEU RoHS DeclarationFormatSizeAdd to My DocumentsREACh DeclarationFormatSizeAdd to My Documents
- All Languages61
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsDimensions(1)ABE7BV10 / BV10E
Mounting and ClearanceMounting
Connections and SchemaHE10 8 Channels(1)SET(2)RESETWiring Diagram(1)Inductive load
Performance CurvesCurves for Determining Cable Type and Length According to the Current8-channel Sub-baseLCable lengthITTotal current per sub base (A)IAAverage current per channel (mA)(1)TSXCDP••2 and ABFH20H••0 cables with c.s.a. 0.08 mm2 (AWG 28).(2)TSXCDP••3 cables with c.s.a. 0.34 mm2 (AWG 22).(3)Cables with c.s.a. 0.13 mm2 (AWG 26).
The curves are given for a voltage drop of 1 V in the cable. For n volts tolerance, multiply the length determined from the graph by n.Electrical Durability (in Millions of Operating cycles) Conforming to IEC 60947-5-1DC Loads
DC12 curvesDC12control of resistive loads and of solid state loads isolated by optocoupler, l/R ≤ 1 ms.(1)Resistive loads(2)Inductive loadsAC Loads
AC12 curvesAC12control of resistive loads and of solid state loads isolated by optocoupler, cos ϕ ≥ 0.9.(1)Resistive loads(2)Inductive loads