Schneider Electric USA Website

Welcome to our website.

Select your location

Welcome the the Schneider Electric French website. It looks like you are located in the United States, would you like to change your location?

Traduisez en francais
View all   Altivar 312 Solar
Schneider Eletric ATV312H018M3412 Picture

ATV312H018M3412

Schneider Eletric ATV312H018M3412 Picture
ATV312H018M3412

variable speed drive ATV312 - 0.18kW - 0.7kVA - 23W - 200..240 V- 3-phase supply

Show more characteristics
  • Product availability
    Non-Stock - Not normally stocked in distribution facility
  • 371.00 USD
    Price is “List Price” and may be subject to a trade discount – check with your local distributor or retailer for actual price.
The maximum number of products that can be compared is 4. Remove already added products.

  • Main
    range of product
    Altivar 312 Solar
    product or component type
    Variable speed drive
    product destination
    Asynchronous motors
    product specific application
    Pumping station with photovoltaic arrays
    assembly style
    With heat sink
    device short name
    ATV312
    Complementary
    motor power kW
    0.18 kW
    Maximum Horse Power Rating
    0.25 hp
    [Us] rated supply voltage
    200...240 V - 5...5 %
    supply voltage limits
    170…264 V
    supply frequency
    50...60 Hz - 5...5 %
    network frequency
    47.5...63 Hz
    Phase
    3 phase
    line current
    1.9 A 240 V
    2.1 A 200 V, Isc = 1 kA
    EMC filter
    Without EMC filter
    apparent power
    0.7 kVA
    prospective line Isc
    1 kA
    continuous output current
    1.5 A 4 kHz
    maximum transient current
    2.3 A 60 s
    power dissipation in W
    23 W at nominal load
    speed drive output frequency
    0.5…500 Hz
    nominal switching frequency
    4 kHz
    switching frequency
    2...16 kHz adjustable
    speed range
    1…50
    transient overtorque
    150…170 % of nominal motor torque
    braking torque
    <= 150 % 60 s with braking resistor
    100 % with braking resistor continuously
    150 % without braking resistor
    asynchronous motor control profile
    Factory set: energy saving mode
    regulation loop
    Frequency PI regulator
    motor slip compensation
    Suppressable
    Adjustable
    Automatic whatever the load
    output voltage
    <= power supply voltage
    electrical connection
    Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6 terminal 0.00 in² (2.5 mm²) AWG 14
    L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- terminal 0.00 in² (2.5 mm²) AWG 14
    tightening torque
    Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6 5.31 lbf.in (0.6 N.m)
    L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- 7.08 lbf.in (0.8 N.m)
    insulation
    Electrical between power and control
    supply
    Internal supply for logic inputs 19...30 V, <100 A overload and short-circuit protection
    Internal supply for reference potentiometer (2.2 to 10 kOhm) 10...10.8 V, <10 A overload and short-circuit protection
    analogue input number
    3
    analogue input type
    AI1 configurable voltage 0...10 V 30 V max 30000 Ohm
    AI2 configurable voltage +/- 10 V 30 V max 30000 Ohm
    AI3 configurable current 0...20 mA 250 Ohm
    sampling duration
    AI1, AI2, AI3 8 ms analog
    LI1...LI6 4 ms discrete
    response time
    AOV, AOC 8 ms analog
    R1A, R1B, R1C, R2A, R2B 8 ms discrete
    linearity error
    +/- 0.2 % output
    analogue output number
    2
    analogue output type
    AOC configurable current 0...20 mA 800 Ohm 8 bits
    AOV configurable voltage 0...10 V 470 Ohm 8 bits
    discrete input logic
    Logic input not wired LI1...LI4), < 13 V
    Negative logic (source) LI1...LI6), > 19 V
    Positive logic (source) LI1...LI6), < 5 V, > 11 V
    discrete output number
    2
    discrete output type
    Configurable relay logic R1A, R1B, R1C) 1 NO + 1 NC - 100000 cycles
    Configurable relay logic R2A, R2B) NC - 100000 cycles
    minimum switching current
    R1-R2 10 mA 5 V DC
    maximum switching current
    2 A 250 V AC inductive cos phi = 0.4 L/R = 7 ms R1-R2)
    2 A 30 V DC inductive cos phi = 0.4 L/R = 7 ms R1-R2)
    5 A 250 V AC resistive cos phi = 1 L/R = 0 ms R1-R2)
    5 A 30 V DC resistive cos phi = 1 L/R = 0 ms R1-R2)
    discrete input number
    6
    discrete input type
    LI1...LI6) programmable 24 V, 0…100 mA PLC 3500 Ohm
    acceleration and deceleration ramps
    Linear adjustable separately from 0.1 to 999.9 s
    S, U or customized
    braking to standstill
    By DC injection
    protection type
    Input phase breaks drive
    Line supply overvoltage and undervoltage safety circuits drive
    Line supply phase loss safety function, for three phases supply drive
    Motor phase breaks drive
    Overcurrent between output phases and earth (on power up only) drive
    Overheating protection drive
    Short-circuit between motor phases drive
    Thermal protection motor
    dielectric strength
    2040 V DC between earth and power terminals
    2880 V AC between control and power terminals
    insulation resistance
    >= 500 mOhm 500 V DC for 1 minute
    local signalling
    Drive voltage 1 LED red)
    CANopen bus status four 7-segment display units
    time constant
    5 ms for reference change
    frequency resolution
    Analog input 0.1...100 Hz
    Display unit 0.1 Hz
    communication port protocol
    Modbus
    CANopen
    connector type
    1 RJ45 Modbus/CANopen
    physical interface
    RS485 multidrop serial link
    transmission frame
    RTU
    transmission rate
    10, 20, 50, 125, 250, 500 kbps or 1 Mbps CANopen
    4800, 9600 or 19200 bps Modbus
    number of addresses
    1…127 CANopen
    1…247 Modbus
    number of drive
    127 CANopen
    31 Modbus
    electromagnetic compatibility
    1.2/50 µs - 8/20 µs surge immunity test level 3 IEC 61000-4-5
    Electrical fast transient/burst immunity test level 4 IEC 61000-4-4
    Electrostatic discharge immunity test level 3 IEC 61000-4-2
    Radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3
    standards
    IEC 61800-5-1
    marking
    CE
    Maximum Height
    5.71 in (145 mm)
    Maximum Width
    2.83 in (72 mm)
    Maximum Depth
    4.80 in (122 mm)
    Net Weight
    2.87 lb(US) (1.3 kg)
    option card
    Communication card CANopen daisy chain
    Communication card DeviceNet
    Communication card Fipio
    Communication card Modbus TCP
    Communication card Profibus DP
    Environment
    IP degree of protection
    IP20 without cover plate
    pollution degree
    2
    protective treatment
    TC
    vibration resistance
    1 gn 13…150 Hz)EN/IEC 60068-2-6
    1.5 mm 3…13 Hz)EN/IEC 60068-2-6
    shock resistance
    15 gn 11 ms EN/IEC 60068-2-27
    relative humidity
    5…95 % without condensation IEC 60068-2-3
    5…95 % without dripping water IEC 60068-2-3
    ambient air temperature for storage
    -13…158 °F (-25…70 °C)
    ambient air temperature for operation
    14…122 °F (-10…50 °C) without derating with protective cover on top of the drive)
    14…140 °F (-10…60 °C) with derating factor without protective cover on top of the drive)
    operating altitude
    <= 3280.84 ft (1000 m) without derating
    >= 3280.84 ft (1000 m) with current derating 1 % per 100 m
    operating position
    Vertical +/- 10 degree
    Ordering and shipping details
    Category
    22152 - ATV320/ATV312/ATV32 (.25 THRU 7.5HP)
    Discount Schedule
    CP4B
    GTIN
    03606480508462
    Nbr. of units in pkg.
    1
    Package weight(Lbs)
    3.97 lb(US) (1.80 kg)
    Returnability
    No
    Packing Units
    Unit Type of Package 1
    PCE
    Package 1 Height
    5.31 in (13.5 cm)
    Package 1 width
    6.89 in (17.5 cm)
    Package 1 Length
    7.09 in (18 cm)
    Contractual warranty
    Warranty
    18 months
  • View more View less

    Documents

    Language
    • All Languages1
    • English1
    • French1
    User guide
    Format
    Size
    Date
    Add to My Documents
    prp.document.label.format pdf
    Size 6 MB
    Date 2/19/16
  • Technical FAQs

    No results found.
    Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.