ATV630U30M3

Altivar Process ATV600

Variable speed drive

Process and utilities

ATV630

Standard version

Synchronous motors
Asynchronous motors

Wall mount

Without EMC filter

IP21IEC 61800-5-1
IP21IEC 60529

UL type 1 UL 508C

Forced convection

50...60 Hz - 5...5 %

3 phase

200...240 V - 15...10 %

3 kW normal duty)
2.2 kW heavy duty)

3 hp heavy duty
4 hp normal duty

11.5 A 200 V normal duty)
9.9 A 240 V normal duty)
8.7 A 200 V heavy duty)
7.6 A 240 V heavy duty)

50 kA

4.1 kVA 240 V normal duty)
3.2 kVA 240 V heavy duty)

13.7 A 4 kHz normal duty
11.2 A 4 kHz heavy duty

16.8 A 60 s heavy duty)
15.1 A 60 s normal duty)

Optimized torque mode
Variable torque standard
Constant torque standard

Permanent magnet motor
Synchronous reluctance motor

0.0001…0.5 kHz

0.1…599 Hz

4 kHz

2...12 kHz adjustable
4...12 kHz with derating factor

STO (safe torque off) SIL 3

16 preset speeds

Modbus TCP
Ethernet
Modbus serial

Slot A communication module, Profibus DP V1
Slot A communication module, Profinet
Slot A communication module, DeviceNet
Slot A communication module, Modbus TCP/EtherNet/IP
Slot A communication module, CANopen daisy chain RJ45
Slot A communication module, CANopen SUB-D 9
Slot A communication module, CANopen screw terminals
Slot A/slot B digital and analog I/O extension module
Slot A/slot B output relay extension module
Slot A communication module, Ethernet IP/Modbus TCP/MD-Link
communication module, BACnet MS/TP
communication module, Ethernet Powerlink

<= power supply voltage

1.1 x In 60 s normal duty)
1.5 x In 60 s heavy duty)

Can be suppressed
Automatic whatever the load
Adjustable
Not available in permanent magnet motor law

Linear adjustable separately from 0.01...9999 s

By DC injection

Thermal protection motor
Safe torque off motor
Motor phase break motor
Thermal protection drive
Safe torque off drive
Overheating drive
Overcurrent between output phases and earth drive
Overload of output voltage drive
Short-circuit protection drive
Motor phase break drive
Overvoltages on the DC bus drive
Line supply overvoltage drive
Line supply undervoltage drive
Line supply phase loss drive
Overspeed drive
Break on the control circuit drive

Display unit 0.1 Hz
Analog input 0.012/50 Hz

Control removable screw terminals 0.5...1.5 mm² AWG 20...AWG 16
Motor screw terminal 4...6 mm² AWG 12...AWG 10
Line side screw terminal 2.5...6 mm² AWG 14...AWG 10

RJ45 on the remote graphic terminal)Ethernet/Modbus TCP
RJ45 on the remote graphic terminal)Modbus serial

2-wire RS 485 Modbus serial

RTU Modbus serial

10/100 Mbit/s Ethernet IP/Modbus TCP
4.8, 9.6, 19.2, 38.4 kbit/s Modbus serial

Half duplex, full duplex, autonegotiation Ethernet/Modbus TCP

8 bits, configurable odd, even or no parity Modbus serial

No impedance Modbus serial

1…247 Modbus serial

Slave Modbus TCP

External supply for digital inputs 24 V DC 19…30 V), <1.25 mA overload and short-circuit protection
Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection
Internal supply for digital inputs and STO 24 V DC 21…27 V), <200 mA overload and short-circuit protection

Local diagnostic 3 LEDs
Embedded communication status 3 LEDs dual colour)
Communication module status 4 LEDs dual colour)
Presence of voltage 1 LED red)

5.67 in (144 mm)

13.78 in (350 mm)

7.99 in (203 mm)

9.92 lb(US) (4.5 kg)

3

AI1, AI2, AI3 software-configurable voltage 0...10 V DC 30 kOhm 12 bits
AI1, AI2, AI3 software-configurable current 0...20 mA/4...20 mA 250 Ohm 12 bits

8

DI1...DI6 programmable, 24 V DC <= 30 V)3.5 kOhm
DI5, DI6 programmable as pulse input 0…30 kHz, 24 V DC <= 30 V)
STOA, STOB safe torque off, 24 V DC <= 30 V)> 2.2 kOhm

DI1...DI6 discrete input level 1 PLC EN/IEC 61131-2
DI5, DI6 discrete input level 1 PLC IEC 65A-68
STOA, STOB discrete input level 1 PLC EN/IEC 61131-2

Positive logic (source) DI1...DI6), < 5 V, > 11 V
Negative logic (sink) DI1...DI6), > 16 V, < 10 V
Positive logic (source) DI5, DI6), < 0.6 V, > 2.5 V
Positive logic (source) STOA, STOB), < 5 V, > 11 V

2

Software-configurable voltage AO1, AO2 0...10 V DC 470 Ohm 10 bits
Software-configurable current AO1, AO2 0...20 mA 10 bits

2 ms +/- 0.5 ms DI1...DI4) - discrete input
5 ms +/- 1 ms DI5, DI6) - discrete input
5 ms +/- 0.1 ms AI1, AI2, AI3) - analog input
10 ms +/- 1 ms AO1) - analog output

+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input
+/- 1 % AO1, AO2 for a temperature variation 60 °C analog output

AI1, AI2, AI3 +/- 0.15 % of maximum value analog input
AO1, AO2 +/- 0.2 % analog output

3

Configurable relay logic R1 fault relay NO/NC 100000 cycles
Configurable relay logic R2 sequence relay NO 100000 cycles
Configurable relay logic R3 sequence relay NO 100000 cycles

Relay output R1, R2, R3)5 ms +/- 0.5 ms)

Relay output R1, R2, R3 5 mA 24 V DC

Relay output R1, R2, R3 resistive, cos phi = 1 3 A 250 V AC
Relay output R1, R2, R3 resistive, cos phi = 1 3 A 30 V DC
Relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2 A 250 V AC
Relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2 A 30 V DC

Between power and control terminals

Building - HVAC Compressor centrifugal
Food and beverage processing Other application
Mining mineral and metal Fan
Mining mineral and metal Pump
Oil and gas Fan
Water and waste water Other application
Building - HVAC Screw compressor
Food and beverage processing Pump
Food and beverage processing Fan
Food and beverage processing Atomization
Oil and gas Electro submersible pump (ESP)
Oil and gas Water injection pump
Oil and gas Jet fuel pump
Oil and gas Compressor for refinery
Water and waste water Centrifuge pump
Water and waste water Positive displacement pump
Water and waste water Electro submersible pump (ESP)
Water and waste water Screw pump
Water and waste water Lobe compressor
Water and waste water Screw compressor
Water and waste water Compressor centrifugal
Water and waste water Fan
Water and waste water Conveyor
Water and waste water Mixer

2.2…3 kW 200…240 V 3 phase

> 1 MOhm 500 V DC for 1 minute to earth

54.5 dB 86/188/EEC

Natural convection 34 W 200 V 4 kHz
Forced convection 104 W 200 V 4 kHz

10038.72 Gal/hr(US) (38 m3/h)

Vertical +/- 10 degree

<48 % full load IEC 61000-3-12

Electrostatic discharge immunity test level 3 IEC 61000-4-2
Radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3
Electrical fast transient/burst immunity test level 4 IEC 61000-4-4
1.2/50 µs - 8/20 µs surge immunity test level 3 IEC 61000-4-5
Conducted radio-frequency immunity test level 3 IEC 61000-4-6

2 EN/IEC 61800-5-1

1.5 mm peak to peak 2…13 Hz)IEC 60068-2-6
1 gn 13…200 Hz)IEC 60068-2-6

15 gn 11 ms IEC 60068-2-27

5…95 % without condensation IEC 60068-2-3

5…122 °F (-15…50 °C) without)
122…140 °F (50…60 °C) with derating factor)

-40…158 °F (-40…70 °C)

<= 3280.84 ft (1000 m) without
1000...4800 m with current derating 1 % per 100 m

Chemical pollution resistance class 3C3 EN/IEC 60721-3-3
Dust pollution resistance class 3S3 EN/IEC 60721-3-3

UL 508C
EN/IEC 61800-3
Environment 1 category C2 EN/IEC 61800-3
Environment 2 category C3 EN/IEC 61800-3
EN/IEC 61800-5-1
IEC 61000-3-12
IEC 60721-3
IEC 61508
IEC 13849-1

DNV-GL
TÜV
ATEX zone 2/22
ATEX INERIS
CSA
REACH
UL

CE

22205 - ATV630 FRAMES 1 & 2

CP4E

00785901966968

6.02 kg (13.28 lb(US))

Yes

ID

Green Premium product

WARNING: This product can expose you to chemicals including: Lead and lead compounds which is known to the State of California to cause Carcinogen & Reproductive harm. For more information go to www.p65warnings.ca.gov

REACh Declaration

Pro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration

Yes

Yes

China RoHS declaration

Product Environmental Profile

End of Life Information

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.