USA
Schneider Electric USA Website

Welcome to our website.

To view product availability in a specific country, select from the country list below. For Investor Relations, please visit our global site.

Select your location
View all Altivar 71 Variable Frequency Drives VFD
Schneider Eletric ATV71H037M3383 Picture

ATV71H037M3383

Schneider Eletric ATV71H037M3383 Picture
ATV71H037M3383

variable speed drive ATV71 - 0.37kW-0.5HP - 240V - EMC filter-graphic terminal

Show more characteristics
Commercial status
Discontinued on 01 January 2018
End-of-service soon on 01 January 2026
  • Product availability
    Non-Stock - Not normally stocked in distribution facility
  • Price*
    850.08 USD
Add to My Products Remove from My Products
The maximum number of products that can be compared is 4

  • Main
    range of product
    Altivar 71
    product or component type
    Variable speed drive
    product specific application
    Complex, high-power machines
    component name
    ATV71
    motor power kW
    0.37 kW, 3 phase 200...240 V
    Maximum Horse Power Rating
    0.5 hp, 3 phase 200...240 V
    maximum motor cable length
    164.04 ft (50 m) shielded cable
    328.08 ft (100 m) unshielded cable
    power supply voltage
    200...240 V - 15...10 %
    Phase
    3 phase
    line current
    3.1 A 240 V 3 phase 0.37 kW / 0.5 hp
    3.5 A 200 V 3 phase 0.37 kW / 0.5 hp
    EMC filter
    Integrated
    assembly style
    With heat sink
    variant
    Control synchronous motors with speed feedback
    apparent power
    1.3 kVA 240 V 3 phase 0.37 kW / 0.5 hp
    prospective line Isc
    5 kA 3 phase
    nominal output current
    3 A 4 kHz 230 V 3 phase 0.37 kW / 0.5 hp
    maximum transient current
    4.5 A 60 s 3 phase 0.37 kW / 0.5 hp
    4.9 A 2 s 3 phase 0.37 kW / 0.5 hp
    output frequency
    0.1…599 Hz
    nominal switching frequency
    4 kHz
    switching frequency
    1...16 kHz adjustable
    4...16 kHz with derating factor
    asynchronous motor control profile
    Voltage/frequency ratio (2 or 5 points)
    Sensorless flux vector control (SFVC) (voltage or current vector)
    Flux vector control (FVC) with sensor (current vector)
    ENA (Energy adaptation) system for unbalanced loads
    type of polarization
    No impedance Modbus
    Complementary
    product destination
    Synchronous motors
    Asynchronous motors
    power supply voltage limits
    170…264 V
    power supply frequency
    50...60 Hz - 5...5 %
    power supply frequency limits
    47.5...63 Hz
    speed range
    1…100 asynchronous motor in open-loop mode, without speed feedback
    1…1000 asynchronous motor in closed-loop mode with encoder feedback
    1…1000 synchronous motor in closed-loop mode with encoder feedback
    1…50 synchronous motor in open-loop mode, without speed feedback
    speed accuracy
    +/- 0.01 % of nominal speed in closed-loop mode with encoder feedback 0.2 Tn to Tn
    +/- 10 % of nominal slip without speed feedback 0.2 Tn to Tn
    torque accuracy
    +/- 15 % in open-loop mode, without speed feedback
    +/- 5 % in closed-loop mode with encoder feedback
    transient overtorque
    170 % +/- 10 % 60 s every 10 minutes
    220 % +/- 10 % 2 s
    braking torque
    <= 150 % with braking or hoist resistor
    30 % without braking resistor
    synchronous motor control profile
    Vector control with speed feedback
    Vector control without speed feedback
    regulation loop
    Adjustable PI regulator
    motor slip compensation
    Adjustable
    Not available in voltage/frequency ratio (2 or 5 points)
    Automatic whatever the load
    Suppressable
    diagnostic
    Drive voltage 1 LED red)
    output voltage
    <= power supply voltage
    insulation
    Electrical between power and control
    type of cable for mounting in an enclosure
    With a NEMA Type1 kit 3 UL 508 cable 104 °F (40 °C), copper 75 °C / PVC
    With an IP21 or an IP31 kit 3 IEC cable 104 °F (40 °C), copper 70 °C / PVC
    Without mounting kit 1 IEC cable 113 °F (45 °C), copper 70 °C / PVC
    Without mounting kit 1 IEC cable 113 °F (45 °C), copper 90 °C / XLPE/EPR
    electrical connection
    Terminal 2.5 mm², AWG 14 AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR)
    Terminal 4 mm², AWG 10 L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB)
    tightening torque
    5.31 lbf.in (0.6 N.m) AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR)
    12.39 lbf.in (1.4 N.m), 12.3 lb.in L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB)
    supply
    Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection
    Internal supply 24 V DC 21…27 V), <200 mA overload and short-circuit protection
    analogue input number
    2
    analogue input type
    AI1-/Al1+ bipolar differential voltage +/- 10 V DC 24 V max 11 bits + sign
    AI2 software-configurable current 0...20 mA 242 Ohm 11 bits
    AI2 software-configurable voltage 0...10 V DC 24 V max 30000 Ohm 11 bits
    input sampling time
    2 ms +/- 0.5 ms AI1-/Al1+) - analog
    2 ms +/- 0.5 ms Al2) - analog
    2 ms +/- 0.5 ms LI1...LI5) - discrete
    2 ms +/- 0.5 ms LI6)if configured as logic input - discrete
    response time
    <= 100 ms in STO (Safe Torque Off)
    AO1 2 ms +/- 0.5 ms analog
    R1A, R1B, R1C 7 ms +/- 0.5 ms discrete
    R2A, R2B 7 ms +/- 0.5 ms discrete
    absolute accuracy precision
    +/- 0.6 % AI1-/Al1+) for a temperature variation 60 °C
    +/- 0.6 % AI2) for a temperature variation 60 °C
    +/- 1 % AO1) for a temperature variation 60 °C
    linearity error
    +/- 0.15 % of maximum value AI1-/Al1+, AI2)
    +/- 0.2 % AO1)
    analogue output number
    1
    analogue output type
    AO1 software-configurable logic output 10 V 20 mA
    AO1 software-configurable current 0...20 mA 500 Ohm 10 bits
    AO1 software-configurable voltage 0...10 V DC 470 Ohm 10 bits
    discrete output number
    2
    discrete output type
    Configurable relay logic R1A, R1B, R1C) NO/NC - 100000 cycles
    Configurable relay logic R2A, R2B) NO - 100000 cycles
    minimum switching current
    3 mA 24 V DC configurable relay logic
    maximum switching current
    R1, R2 2 A 250 V AC inductive, cos phi = 0.4
    R1, R2 2 A 30 V DC inductive, cos phi = 0.4
    R1, R2 5 A 250 V AC resistive, cos phi = 1
    R1, R2 5 A 30 V DC resistive, cos phi = 1
    discrete input number
    7
    discrete input type
    LI1...LI5 programmable 24 V DC level 1 PLC 3500 Ohm
    LI6 switch-configurable 24 V DC level 1 PLC 3500 Ohm
    LI6 switch-configurable PTC probe 0…6 1500 Ohm
    PWR safety input 24 V DC 1500 Ohm ISO 13849-1 level d
    discrete input logic
    Negative logic (sink) LI1...LI5), > 16 V, < 10 V
    Positive logic (source) LI1...LI5), < 5 V, > 11 V
    Negative logic (sink) LI6)if configured as logic input, > 16 V, < 10 V
    Positive logic (source) LI6)if configured as logic input, < 5 V, > 11 V
    acceleration and deceleration ramps
    Linear adjustable separately from 0.01 to 9000 s
    Automatic adaptation of ramp if braking capacity exceeded, by using resistor
    S, U or customized
    braking to standstill
    By DC injection
    protection type
    Against exceeding limit speed drive
    Against input phase loss drive
    Break on the control circuit drive
    Input phase breaks drive
    Line supply overvoltage drive
    Line supply undervoltage drive
    Overcurrent between output phases and earth drive
    Overheating protection drive
    Overvoltages on the DC bus drive
    Short-circuit between motor phases drive
    Thermal protection drive
    Motor phase break motor
    Power removal motor
    Thermal protection motor
    insulation resistance
    > 1 mOhm 500 V DC for 1 minute to earth
    frequency resolution
    Analog input 0.024/50 Hz
    Display unit 0.1 Hz
    communication port protocol
    Modbus
    CANopen
    connector type
    1 RJ45 on front face)Modbus
    1 RJ45 on terminal)Modbus
    Male SUB-D 9 on RJ45CANopen
    physical interface
    2-wire RS 485 Modbus
    transmission frame
    RTU Modbus
    transmission rate
    4800 bps, 9600 bps, 19200 bps, 38.4 Kbps Modbus on terminal
    9600 bps, 19200 bps Modbus on front face
    20 kbps, 50 kbps, 125 kbps, 250 kbps, 500 kbps, 1 Mbps CANopen
    data format
    8 bits, 1 stop, even parity Modbus on front face
    8 bits, odd even or no configurable parity Modbus on terminal
    number of addresses
    1…127 CANopen
    1…247 Modbus
    method of access
    Slave CANopen
    marking
    CE
    operating position
    Vertical +/- 10 degree
    height
    9.06 in (230 mm)
    depth
    6.89 in (175 mm)
    width
    5.12 in (130 mm)
    net weight
    6.61 lb(US) (3 kg)
    option card
    Communication card CC-Link
    Controller inside programmable card
    Communication card DeviceNet
    Communication card Ethernet/IP
    Communication card Fipio
    I/O extension card
    Communication card Interbus-S
    Interface card for encoder
    Communication card Modbus Plus
    Communication card Modbus TCP
    Communication card Modbus/Uni-Telway
    Overhead crane card
    Communication card Profibus DP
    Communication card Profibus DP V1
    Environment
    noise level
    43 dB 86/188/EEC
    dielectric strength
    2830 V DC between earth and power terminals
    4230 V DC between control and power terminals
    electromagnetic compatibility
    1.2/50 µs - 8/20 µs surge immunity test level 3 IEC 61000-4-5
    Conducted radio-frequency immunity test level 3 IEC 61000-4-6
    Electrical fast transient/burst immunity test level 4 IEC 61000-4-4
    Electrostatic discharge immunity test level 3 IEC 61000-4-2
    Radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3
    Voltage dips and interruptions immunity test IEC 61000-4-11
    standards
    EN 55011 class A group 1
    EN 61800-3 environments 2 category C2
    EN 61800-3 environments 1 category C2
    EN/IEC 61800-3
    IEC 60721-3-3 class 3S2
    EN/IEC 61800-5-1
    UL Type 1
    IEC 60721-3-3 class 3C1
    product certifications
    C-Tick
    UL
    GOST
    CSA
    NOM 117
    pollution degree
    2 EN/IEC 61800-5-1
    IP degree of protection
    IP20 on upper part without blanking plate on cover EN/IEC 60529
    IP20 on upper part without blanking plate on cover EN/IEC 61800-5-1
    IP21 EN/IEC 60529
    IP21 EN/IEC 61800-5-1
    IP41 on upper part EN/IEC 60529
    IP41 on upper part EN/IEC 61800-5-1
    IP54 on lower part EN/IEC 60529
    IP54 on lower part EN/IEC 61800-5-1
    vibration resistance
    1 gn 13…200 Hz)EN/IEC 60068-2-6
    1.5 mm peak to peak 3…13 Hz)EN/IEC 60068-2-6
    shock resistance
    15 gn 11 ms EN/IEC 60068-2-27
    relative humidity
    5…95 % without condensation IEC 60068-2-3
    5…95 % without dripping water IEC 60068-2-3
    ambient air temperature for operation
    14…122 °F (-10…50 °C) without)
    ambient air temperature for storage
    -13…158 °F (-25…70 °C)
    operating altitude
    <= 3280.84 ft (1000 m) without
    3280.84...9842.52 ft (1000...3000 m) with current derating 1 % per 100 m
    Ordering and shipping details
    Category
    22130 - ATV71 - 1/2 THRU 5HP DRIVES
    Discount Schedule
    CP4C
    GTIN
    03389119213677
    Package weight(Lbs)
    4.25 kg (9.37 lb(US))
    Returnability
    No
    Country of origin
    ID
    Contractual warranty
    Warranty
    18 months
  • View more View less

    Documents

    Language
    • All Languages5
    • English4
    • French1
    Catalog
    Format
    Size
    Date
    Add to My Documents
    Certificate
    Format
    Size
    Date
    Add to My Documents
    Size pdf
    Size 2.3 MB
    Date 4/20/16
    End of Life Information
    Format
    Size
    Date
    Add to My Documents
    Size pdf
    Size 200.1 KB
    Date 7/1/11
    Product Environmental Profile
    Format
    Size
    Date
    Add to My Documents
    Size pdf
    Size 687.9 KB
    Date 6/1/05
  • Technical FAQs

    No results found.
    Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Compare products: /