View all Lexium 32i Integrated Servo Drives
servo motor BMI 3-phase - untapped IP54 single turn - 131072 p/t - brakeShow more characteristics
* Price is “List Price” and may be subject to a trade discount – check with your local distributor or retailer for actual price.
Product availabilityNon-Stock - Not normally stocked in distribution facility
Main range compatibilityLexium 32i product or component typeServo motor with power stage device short nameBMI Complementary maximum mechanical speed6000 rpm [Us] rated supply voltage208...480 V - 15...10 % supply voltage limits208…480 V PhaseThree phase supply frequency50/60 Hz - 5...5 % network frequency limits47.5…63 Hz EMC filterIntegrated continuous output current4 A 8 kHz output current 3s peak12 A 400 V 3 s continuous stall current4 A continuous stall torque53.10 lbf.in (6 N.m) 208...480 V three phase peak stall torque123.91 lbf.in (14 N.m) 208 V three phase123.91 lbf.in (14 N.m) 400 V three phase123.91 lbf.in (14 N.m) 480 V three phase nominal output power1000 W 208 V three phase1900 W 400 V three phase1900 W 480 V three phase nominal torque45.14 lbf.in (5.1 N.m) 400 V three phase47.79 lbf.in (5.4 N.m) 208 V three phase36.29 lbf.in (4.1 N.m) 480 V three phase nominal speed1900 rpm 208 V three phase3800 rpm 400 V three phase4700 rpm 480 V three phase maximum current Irms17.5 A 208 V, three phase17.5 A 400 V, three phase17.5 A 480 V, three phase product compatibilityDrive control unit LXM32i CANopenDrive control unit LXM32i EtherCAT shaft endUntapped second shaftWithout second shaft end shaft diameter0.75 in (19 mm) shaft length1.57 in (40 mm) feedback typeAbsolute single turn SinCos Hiperface speed feedback resolution131072 points/turn holding brakeWith holding torque48.68 lbf.in (5.5 N.m) holding brake mounting supportInternational standard flange motor flange size3.94 in (100 mm) electrical connectionPrinted circuit board connector torque constant1.28 N.m/A 68 °F (20 °C) back emf constant84.52 V/krpm 68 °F (20 °C) number of motor poles10 rotor inertia6.77 kg.cm² stator resistance2.347 Ohm 68 °F (20 °C) stator inductance9.79 mH 68 °F (20 °C) stator electrical time constant4.17 ms 68 °F (20 °C) maximum radial force Fr990 N 1000 rpm790 N 2000 rpm690 N 3000 rpm620 N 4000 rpm580 N 5000 rpm maximum axial force Fa0.2 x Fr brake pull-in power8 W type of coolingNatural convection length11.10 in (282 mm) number of motor stacks2 centring collar diameter3.74 in (95 mm) centring collar depth0.14 in (3.5 mm) number of mounting holes4 mounting holes diameter0.35 in (9 mm) circle diameter of the mounting holes4.53 in (115 mm) distance shaft shoulder-flange0.14 in (3.5 mm) Environment IP degree of protectionShaft IP54Housing IP65 Ordering and shipping details Category18287 - LEXIUM 32 INTEGRATED DRIVES Discount SchedulePC56 GTIN03606485376936 Package weight(Lbs)9.53 kg (21 lb(US)) ReturnabilityNo Country of originDE Offer Sustainability Sustainable offer statusGreen Premium product California proposition 65WARNING: This product can expose you to chemicals including: Lead and lead compounds which is known to the State of California to cause Carcinogen & Reproductive harm. For more information go to www.p65warnings.ca.gov REACh Regulation EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity Profile WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. Contractual warranty Warranty18 months
China RoHS declarationFormatSizeAdd to My DocumentsEU RoHS DeclarationFormatSizeAdd to My Documents
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.