motion servo drive - Lexium 32-single phase supply voltage 115/230V - 0.5/1.kWShow more characteristics
Product availabilityNon-Stock - Not normally stocked in distribution facility
Main range of productLexium 32 product or component typeMotion servo drive device short nameLXM32S format of the driveBook PhaseSingle phase [Us] rated supply voltage100...120 V - 15...10 %200...240 V - 15...10 % supply voltage limits85…132 V170…264 V supply frequency50/60 Hz - 5...5 % network frequency47.5...63 Hz EMC filterIntegrated continuous output current6 A 8 kHz output current 3s peak10 A 115 V 5 s maximum continuous power500 W 115 V nominal power0.5 kW 115 V 8 kHz1 kW 230 V line current9.9 A 74 % 115 V, with external line choke 2 mH10.6 A 93 % 230 V, with external line choke 2 mH8.5 A 147 % 115 V, without line choke Complementary switching frequency8 kHz overvoltage categoryIII maximum leakage current30 mA output voltage<= power supply voltage electrical isolationBetween power and control type of cableSingle-strand IEC cable 122 °F (50 °C)) copper 90 °C XLPE/EPR electrical connectionTerminal 3 mm², AWG 12 PA/+, PBI, PBe) tightening torquePA/+, PBI, PBe 4.43 lbf.in (0.5 N.m) discrete input number2 capture discrete input typeCapture CAP sampling duration0.25 ms discrete input voltage24 V DC capture discrete input logicPositive compliment of STO_A, compliment of STO_B)< 5 V > 15 V EN/IEC 61131-2 type 1 response time<= 5 ms compliment of STO_A, compliment of STO_B discrete output number3 discrete output typeLogic DO)24 V DC discrete output voltage<= 30 V DC discrete output logicPositive or negative DO)EN/IEC 61131-2 contact bounce time<= 1 ms compliment of STO_A, compliment of STO_B braking current50 mA response time on output250 µs DO)discrete safety functionSTO (safe torque off), integrated safety levelSIL 3 EN/IEC 61508 communication interfaceModbus, integratedSERCOS III, integrated connector typeRJ45 (labelled CN7) Modbus commissioning port2-wire RS485 multidrop Modbus transmission rate9600, 19200, 38400 bps 131.23 ft (40 m) Modbus number of addresses1…247 Modbus status LEDServo drive voltage 1 LED red) signalling functionDisplay of faults 7 segments markingCE operating positionVertical +/- 10 degree product compatibilityServo motor BMH 2.76 in (70 mm), 1 width2.68 in (68 mm) height10.63 in (270 mm) depth9.33 in (237 mm) product weight4.19 lb(US) (1.9 kg) Environment electromagnetic compatibilityConducted EMC EN 55011 class A group 1 standardsEN/IEC 61800-3 product certificationsCSA IP degree of protectionIP20 EN/IEC 60529 vibration resistance1 gn 13…150 Hz)EN/IEC 60068-2-6 shock resistance15 gn 11 ms EN/IEC 60028-2-27 pollution degree2 EN/IEC 61800-5-1 environmental characteristicClasses 3C1 IEC 60721-3-3 relative humidityClass 3K3 (5 to 85 %) without condensation IEC 60721-3-3 ambient air temperature for operation32…122 °F (0…50 °C) UL ambient air temperature for storage-13…158 °F (-25…70 °C) type of coolingIntegrated fan operating altitude<= 3280.84 ft (1000 m) without Ordering and shipping details Category18261 - LEXIUM 32 SERVO DRIVES II Discount SchedulePC51 GTIN03606480694752 Package weight(Lbs)1.91 kg (4.2 lb(US)) ReturnabilityNo Country of originID Offer Sustainability Sustainable offer statusGreen Premium product California proposition 65WARNING: This product can expose you to chemicals including: Lead and lead compounds which is known to the State of California to cause Carcinogen & Reproductive harm. For more information go to www.p65warnings.ca.gov REACh Regulation EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity Profile WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. Contractual warranty Warranty18 months
User guideFormatSizeAdd to My DocumentsSize pdfSize 6.5 MBDate 7/1/19DescriptionThis manual describes technical characteristics, installation, commissioning, operation and maintenanceof the servo drive Lexium 32S (LXM32S).Size pdfSize 6.7 MBDate 7/1/19DescriptionCe manuel décrit les propriétés techniques, l'installation, la mise en service et la maintenance, le fonctionnementet la maintenance du servo variateur Lexium 32S (LXM32S).China RoHS declarationFormatSizeAdd to My DocumentsEU RoHS DeclarationFormatSizeAdd to My DocumentsProduct Environmental ProfileFormatSizeAdd to My Documents
- All Languages8
Software and FirmwareLanguage
Firmware - ReleasedFormatSizeAdd to My DocumentsSize zipSize 4.6 MBDate 10/2/18
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsLexium 32 Servo DriveDimensions
Mounting and ClearanceLexium 32 Motion Control Servo DrivesMounting Recommendations
LXM32•U45M2, •U90M2 and LXM32•U60N4 servo drives are cooled by natural convection. LXM32•D18M2, •D30M2, LXM32 •D12N4, •D18N4, •D30N4 and •D72N4servo drives have an integrated fan.
When installing the servo drive in the enclosure, follow the instructions below with regard to the temperature and protection index:
Provide sufficient cooling of the servo drive
Do not mount the servo drive near heat sources
Do not mount the servo drive on flammable materials
Do not heat the servo drive cooling air by currents of hot air from other equipment and components, for example from an external braking resistor
Mount the servo drive vertically (± 10%)
If the servo drive is used above its thermal limits, control stops due to overtemperature
NOTE: For cables that are connected via the underside of the servo drive, a free space ≥ 200 mm/7.87 in. is required under the unit to comply with the bending radius of the connection cables.
Instructions to be followed
d ≥ 0 mm
+ 50°C…+ 60°C
d ≥ 0 mm
Reduce the output current by 2.2% per °C above 50°C
NOTE: Do not use insulated enclosures, as they have a poor level of conductivity.Recommendations for Mounting in an Enclosure
To ensure good air circulation in the servo drive:
(1)Natural convection(2)Forced ventilation
Fit ventilation grilles on the enclosure.
Ensure that ventilation is adequate, otherwise install a forced ventilation unit with a filter.
Mounting in Metal Enclosure (IP 54 Degree of Protection)
Any apertures and/or fans must provide a flow rate at least equal to that of the servo drive fans (refer to characteristics).
Use special filters with IP 54 protection.
The servo drive must be mounted in a dust and damp proof enclosure in certain environmental conditions, such as dust, corrosive gases, high humidity with risk of condensation and dripping water, splashing liquid, etc. In these cases, Lexium 32 servo drives can be installed in an enclosure where the internal temperature must not exceed 60°C.