green complete pilot light Ø22 plain lens with BA9s bulb 110...120VShow more characteristics
Product availabilityNon-Stock - Not normally stocked in distribution facility
Main range of productHarmony XB5 product or component typePilot light device short nameXB5 bezel materialDark grey plastic fixing collar materialPlastic head typeStandard mounting diameter0.87 in (22 mm) sale per indivisible quantity1 shape of signaling unit headRound cap/operator or lens colourGreen operator additional informationWith plain lens light sourceIncandescent bulb baseBA 9s light block supplyVia integral transformer 1.2 VA 6 V light source colourGreen [Us] rated supply voltage110...120 V AC 50/60 Hz [Us] rated supply voltage110...120 V AC 50/60 Hz Complementary height1.65 in (42 mm) width1.18 in (30 mm) depth2.17 in (55 mm) terminals description ISO n°1(X1-X2)PL net weight0.24 lb(US) (0.109 kg) resistance to high pressure washer1015.26 psi (7000000 Pa) 131 °F (55 °C) 0.1 m connections - terminalsScrew clamp terminals, <= 2 x 1.5 mm² with cable end EN/IEC 60947-1Screw clamp terminals, 1 x 0.22...2 x 2.5 mm² without cable end EN/IEC 60947-1 [Ui] rated insulation voltage600 V 3)EN 60947-1 [Uimp] rated impulse withstand voltage6 kV EN 60947-1 signalling typeSteady device presentationComplete product Environment protective treatmentTH ambient air temperature for storage-40…158 °F (-40…70 °C) ambient air temperature for operation-40…131 °F (-40…55 °C) electrical shock protection classClass II IEC 60536 overvoltage categoryClass II IEC 60536 IP degree of protectionIP66 IEC 60529IP67 IEC 60529IP69 IEC 60529IP69K ISO 20653 NEMA degree of protectionNEMA 13NEMA 4X IK degree of protectionIK05 IEC 50102 standardsUL 508CSA C22.2 No 14EN/IEC 60947-5-4JIS C8201-5-1EN/IEC 60947-5-1EN/IEC 60947-1JIS C8201-1 product certificationsCSAUL listed vibration resistance5 gn 12…500 Hz)IEC 60068-2-6 shock resistance30 gn 18 ms) half sine wave acceleration IEC 60068-2-2750 gn 11 ms) half sine wave acceleration IEC 60068-2-27 Ordering and shipping details Category22467 - PUSHBUTTONS,22MM(PLASTIC) NEW Discount ScheduleCS2 GTIN00785901383918 Package weight(Lbs)0.09 kg (0.2 lb(US)) ReturnabilityNo Country of originFR Offer Sustainability Sustainable offer statusGreen Premium product California proposition 65WARNING: This product can expose you to chemicals including: Lead and lead compounds which is known to the State of California to cause Carcinogen & Reproductive harm. For more information go to www.p65warnings.ca.gov REACh Regulation REACh free of SVHCYes EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity Profile WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. Contractual warranty Warranty18 months
CatalogFormatSizeAdd to My DocumentsSize pdfSize 8.6 MBDate 5/12/19DescriptionSection 19 of Digest 178 Catalog includes selection and ordering information for push buttons and operator interface equipment. 16mm XB6 XB6E, 22mm XB4 XB5 XB5R XB4R XB7, 30 mm push buttons, pendant stations, foot switches, and rotary cam switches, 2 position, 3 position selector switches. Replaces Digest 177 section 19; 0100CT1501_SEC-19CADFormatSizeAdd to My DocumentsInstruction SheetFormatSizeAdd to My DocumentsChina RoHS declarationFormatSizeAdd to My DocumentsEU RoHS DeclarationFormatSizeAdd to My Documents
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsDimensionse:clamping thickness: 1 to 6 mm / 0.04 to 0.24 in.a:43 mm / 1.69 in.b:30 mm / 1.18 in.c:41.5 mm / 1.63 in.
Mounting and ClearancePanel Cut-out for Pushbuttons, Switches and Pilot Lights (Finished Holes, Ready for Installation)Connection by Screw Clamp Terminals or Plug-in Connectors or on Printed Circuit Board(1)Diameter on finished panel or support(2)For selector switches and Emergency stop buttons, use of an anti-rotation plate type ZB5AZ902 is recommended.(3)Ø22.5 mm recommended (Ø22.3 0+0.4) / Ø0.89 in. recommended (Ø0.88 in. 0+0.016)
a in mm
a in in.
b in mm
b in in.
By screw clamp terminals or plug-in connector
By Faston connectors
On printed circuit board
1.18Detail of Lug Recess(1)Diameter on finished panel or support(2)For selector switches and Emergency stop buttons, use of an anti-rotation plate type ZB5AZ902 is recommended.(3)Ø22.5 mm recommended (Ø22.3 0+0.4) / Ø0.89 in. recommended (Ø0.88 in. 0+0.016)