View all Preventa XCS
metal safety switch XCSE - 2NC+1NO - slow break - 2 entries tapped Pg 13- 24VShow more characteristics
* Price is “List Price” and may be subject to a trade discount – check with your local distributor or retailer for actual price.
Product availabilityNon-Stock - Not normally stocked in distribution facility
Main range of productPreventa Safety detection product or component typeSafety switch component nameXCSE designRectangular materialMetal head typeKey operated turret head contacts type and composition2 NC + 1 NO contact operationSlow-break, break before make solenoid contacts type and composition1 NC + 1 NO slow-break, simultaneous) cable entry2 entries tapped Pg 13.5 electromagnet interlockingLocking on de-energisation and unlocking on energisation of solenoid [Us] solenoid rated supply voltage24 V - 20...10 % cable outer diameter0.35…0.47 in (9…12 mm) electrical connectionTerminal 1 x 0.5...2 x 1.5 mm² with or without cable end number of poles3 locking options descriptionWith interlocking, locking by solenoid local signallingGuard open/guard closed and locked 2 LEDs green or orange) signalling circuit voltage24/48 V 20...52 V) Complementary positive openingWith NC contact supply voltage typeAC/DC supply frequency50/60 Hz load factor1 power consumption in VA10 VA inrush10 VA sealed signalling circuit typeAC/DC signalling circuit consumption7 mA mechanical durability1000000 cycles minimum actuation speed0.03 ft/s (0.01 m/s) maximum actuation speed1.64 ft/s (0.5 m/s) [Ie] rated operational current0.55 A 125 V, DC-13, Q300 EN/IEC 60947-5-10.27 A 250 V, DC-13, Q300 EN/IEC 60947-5-13 A 120 V, AC-15, B300 EN/IEC 60947-5-11.5 A 240 V, AC-15, B300 EN/IEC 60947-5-1 [Ithe] conventional enclosed thermal current6 A [Ui] rated insulation voltage50 VEN/IEC 60947-1 signalling circuit [Uimp] rated impulse withstand voltage6 kV EN/IEC 60947-5-1 protection typeOvervoltage protection signalling circuit short-circuit protection10 A cartridge fuse gG (gl) actuator forcible withdrawal rtc2000 N minimum actuator force for extraction20 N maximum operating rate10 cyc/mn for maximum durability safety levelCan reach category 4 with the appropriate monitoring system and correctly wired EN/ISO 13849-1Can reach PL = e with the appropriate monitoring system and correctly wired EN/ISO 13849-1Can reach SIL 3 with the appropriate monitoring system and correctly wired EN/IEC 61508 safety reliability dataB10d = 5000000 value given for a life time of 20 years limited by mechanical or contact wear body materialZamak head materialZamak depth1.73 in (44 mm) height5.75 in (146 mm) width3.86 in (98 mm) net weight2.51 lb(US) (1.14 kg) Environment standardsUL 508EN/IEC 60204-1CSA C22.2 No 14EN/IEC 60947-5-1EN 1088/ISO 14119EN/ISO 12100 product certificationsCSAUL protective treatmentTC ambient air temperature for operation-13…104 °F (-25…40 °C) ambient air temperature for storage-40…158 °F (-40…70 °C) vibration resistance5 gn 10…500 Hz)IEC 60068-2-6 shock resistance10 gn 11 ms IEC 60068-2-27 electrical shock protection classClass I EN/IEC 61140 IP degree of protectionIP67 EN/IEC 60529 and EN/IEC 60947-5-1 Ordering and shipping details Category22411 - LIMIT SWITCHES,IEC,XCKJ Discount ScheduleT GTIN03389110956825 Package weight(Lbs)0.82 kg (1.8 lb(US)) ReturnabilityNo Country of originFR Offer Sustainability Sustainable offer statusGreen Premium product California proposition 65WARNING: This product can expose you to chemicals including: Di-isodecyl phthalate (DIDP) and Diisononyl phthalate (DINP) which is known to the State of California to cause Carcinogen and Reproductive harm. For more information go to www.p65warnings.ca.gov REACh Regulation EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury freeYes RoHS exemption information Environmental Disclosure Circularity Profile Contractual warranty Warranty18 months
EU RoHS DeclarationFormatSizeAdd to My DocumentsProduct Environmental ProfileFormatSizeAdd to My Documents
- All Languages5
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.