inductive sensor XS1 M18 - L50mm - brass - Sn10mm - 12..24VDC - M12Show more characteristics
Product availabilityStock - Normally stocked in distribution facility
- Reason for Substitution: End of life
- Substitution date: 01 January 2017
Main range of productOsiSense XS series nameGeneral purpose sensor typeInductive proximity sensor device application- sensor nameXS1 sensor designCylindrical M18 size50 mm body typeFixed detector flush mounting acceptanceFlush mountable materialMetal enclosure materialNickel plated brass type of output signalDiscrete wiring technique3-wire [Sn] nominal sensing distance0.39 in (10 mm) discrete output function1 NO output circuit typeDC discrete output typePNP electrical connectionMale connector M12, 4 pins [Us] rated supply voltage12...24 V DC reverse polarity protection switching capacity in mA<= 200 mA DC overload and short-circuit protection IP degree of protectionIP67 IEC 60529IP69K DIN 40050 Complementary thread typeM18 x 1 detection faceFrontal front materialPPS operating zone0.00…0.31 in (0…8 mm) differential travel1...15% of Sr status LEDOutput state 1 LED yellow) supply voltage limits10…36 V DC switching frequency<= 1000 Hz maximum voltage drop<2 V closed) current consumption0...10 mA no-load maximum delay first up5 ms maximum delay response0.3 ms maximum delay recovery0.7 ms markingCE threaded length1.10 in (28 mm) height0.71 in (18 mm) length1.97 in (50 mm) net weight0.09 lb(US) (0.04 kg) Environment product certificationsULCSA ambient air temperature for operation-13…122 °F (-25…50 °C) ambient air temperature for storage-40…185 °F (-40…85 °C) vibration resistance25 gn +/- 2 mm 10…55 Hz)IEC 60068-2-6 shock resistance50 gn 11 ms IEC 60068-2-27 Ordering and shipping details Category22486 - SENSORS, PROXIMITY Discount ScheduleDS2 GTIN00785901911579 Package weight(Lbs)0.06 kg (0.13 lb(US)) ReturnabilityYes Country of originFR Offer Sustainability Sustainable offer statusGreen Premium product California proposition 65WARNING: This product can expose you to chemicals including: Di-isodecyl phthalate (DIDP) and Diisononyl phthalate (DINP) which is known to the State of California to cause Carcinogen and Reproductive harm. For more information go to www.p65warnings.ca.gov REACh Regulation EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury freeYes RoHS exemption information Environmental Disclosure Circularity Profile Contractual warranty Warranty18 months
CatalogFormatSizeAdd to My DocumentsCADFormatSizeAdd to My DocumentsCertificateFormatSizeAdd to My DocumentsInstruction SheetFormatSizeAdd to My DocumentsDeclaration of conformityFormatSizeAdd to My DocumentsEU RoHS DeclarationFormatSizeAdd to My Documents
- All Languages11
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Mounting and ClearanceMinimum Mounting Distances
Side by sidee (1) ≥20 mm/0.79 in.
Face to facee (2) ≥96 mm/3.78 in.
Facing a metal objecte (3) ≥30 mm/1.18 in.
Mounted in a metal supportd ≥28 mm/1.10 in.h ≥3.6 mm/0.14 in.
Connections and SchemaWiring Schemes
Performance CurvesPerformance CurvesStandard Steel Target : 18x18x1 mm(1)Pick-up points(2)Drop-out points (object approaching from the side)(y)Sensing distance in mm