View all Preventa XU
safety light curtain type 4 - XUSLB - for finger protection - 1360mmShow more characteristics
Discontinued on 31 March 2015
End-of-service on 31 March 2015
XUSLBQ6A1360 has not been replaced. Please contact your customer care center for more information.
The maximum number of products that can be compared is 4. Remove already added products.
Main range of productPreventa Safety detection series nameBasic product or component typeSafety light curtain type 4 device short nameXUSLB output type1 auxiliary output solid-state PNP2 safety outputs OSSD solid-state PNP (NO) short-circuit protection) product specific applicationFor finger protection minimum object diameter for detection0.55 in (14 mm) [Sn] nominal sensing distance9.84 ft (3 m) with Programming and Diagnostic Module (PDM)0.98…22.97 ft (0.3…7 m) height protected53.54 in (1360 mm) number of beams136 Complementary detection systemTransmitter-receiver system response time41 ms kit composition1 arc suppressor set(s)1 receiver(s)1 test rod(s)1 transmitter(s) 1 user guide with certificate of conformity on CD-ROM 2 sets of 2 brackets with fixings [EAA] effective aperture angle2.5 ° at 3 m light sourceGaAIAs LED, 880 nm [Us] rated supply voltage24 V DC +/- 20 % [Ie] rated operational current2 A current consumption450 mA no-load receiver1.8 A with maximum load receiver285 mA transmitter output current limits100 mA auxiliary output625 mA safety outputs OSSD output voltage24 V output circuit typeDC switching capacity in mA50 mA electrical connection1 female connector M12 5 pins transmitter1 female connector M12 8 pins receiver function availableAlignment aid by display of each light beam broken accessible by cabling aloneAuto/manual accessible via programming and diagnostic moduleAutomatic start accessible by cabling aloneAuxiliary output (PNP, status signalling) accessible by cabling aloneDisplay of operating modes and faults by LED and/or PDM accessible via programming and diagnostic moduleLED display of operating modes and faults accessible by cabling aloneLight beam coding (A or B) accessible via programming and diagnostic moduleMonitoring of external switching devices (EDM: External Device Monitoring) accessible via programming and diagnostic moduleProgramming+downloading of conf settings, via programming+diagnostic module(PDM) accessible via programming and diagnostic moduleSensing distance (short, long) accessible via programming and diagnostic moduleTest (MTS: Monitoring Test Signal) accessible by cabling alone markingCE materialAluminium casing20 % fibre glass impregnated nylon end caps fixing modeEnd brackets net weight13.62 lb(US) (6.18 kg) Environment standardsOSHA 1910-217CEMC 2004/108/ECEN/IEC 61496-2Work equipment directive 2009/104/ECMachinery directive 2006/42/ECEN/IEC 61496-1OSHA 1910-212EN/IEC 61496-1-2 for type 4 ESPEROHS directive 2002/95/ECANSI B11:19-1990ANSI/RIA R15.06 product certificationsCSAULTÜV safety levelCan reach SIL 3 correctly wired IEC 61508Can reach category 4 correctly wired EN/ISO 13849-1Can reach PL = e correctly wired EN/ISO 13849-1Type 4 IEC 61496-1-2 safety reliability dataPFH = 4.9E-8 1/h IEC 61508 verified in worst case conf: 256 beams, 2 segments, mute 20 year(s) ambient air temperature for operation14…131 °F (-10…55 °C) ambient air temperature for storage-13…167 °F (-25…75 °C) relative humidity0…95 % without condensation IP degree of protectionIP65 shock resistance10 gn 16 ms IEC 61496-1 vibration resistance0.35 +/- 0.05 mm 10…55 Hz)IEC 61496-1 Ordering and shipping details Category22455-LIGHT CURTAINS - XUSL Discount ScheduleDS2 GTIN03389119030212 ReturnabilityNo Country of originUS Contractual warranty Warranty18 months
User guideFormatSizeAdd to My Documents
- All Languages4
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.