red flush illuminated pushbutton head Ø22 spring return for integral LEDShow more characteristics
Product availabilityStock - Normally stocked in distribution facility
Main range of productHarmony XB4 product or component typeHead for illuminated push-button device short nameZB4 product compatibilityIntegral LED bezel materialChromium plated metal head typeStandard mounting diameter0.87 in (22 mm) sale per indivisible quantity1 shape of signaling unit headRound type of operatorspring return operator profileRed flush, unmarked operator additional informationFor insertion of legend Complementary CAD overall width1.14 in (29 mm) CAD overall height1.14 in (29 mm) CAD overall depth1.18 in (30 mm) net weight0.06 lb(US) (0.028 kg) resistance to high pressure washer1015.26 psi (7000000 Pa) 131 °F (55 °C) 0.1 m mechanical durability10000000 cycles electrical composition codeM1 6 single front mounting integral LEDM2 6 single and double front mounting integral LEDM6 2 single front mounting integral LED and transformerM10 2 single front mounting integral LEDC3 6 single front mountingC4 6 single and double front mountingC14 2 single front mounting device presentationBasic element Environment protective treatmentTH ambient air temperature for storage-40…158 °F (-40…70 °C) ambient air temperature for operation-40…158 °F (-40…70 °C) overvoltage categoryClass I IEC 60536 IP degree of protectionIP66 IEC 60529IP67IP69IP69K NEMA degree of protectionNEMA 13NEMA 4X IK degree of protectionIK06 EN 50102 standardsJIS C8201-5-1UL 508EN/IEC 60947-5-5EN/IEC 60947-1CSA C22.2 No 14EN/IEC 60947-5-1EN/IEC 60947-5-4JIS C8201-1 product certificationsLROS (Lloyds register of shipping)GLRINADNVUL listedCSABV vibration resistance5 gn 2…500 Hz)IEC 60068-2-6 shock resistance30 gn 18 ms) half sine wave acceleration IEC 60068-2-2750 gn 11 ms) half sine wave acceleration IEC 60068-2-27 Ordering and shipping details Category22468 - PUSHBUTTONS,22MM(METAL) NEW Discount ScheduleCS2 GTIN00785901380276 Package weight(Lbs)0.03 kg (0.07 lb(US)) ReturnabilityYes Country of originFR Offer Sustainability Sustainable offer statusGreen Premium product California proposition 65WARNING: This product can expose you to chemicals including: Nickel compounds and Di-isodecyl phthalate (DIDP) which is known to the State of California to cause Carcinogen and Reproductive harm. For more information go to www.p65warnings.ca.gov REACh Regulation REACh free of SVHCYes EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Toxic heavy metal freeYes Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity Profile Contractual warranty Warranty18 months
CatalogFormatSizeAdd to My DocumentsSize pdfSize 8.6 MBDate 5/12/19DescriptionSection 19 of Digest 178 Catalog includes selection and ordering information for push buttons and operator interface equipment. 16mm XB6 XB6E, 22mm XB4 XB5 XB5R XB4R XB7, 30 mm push buttons, pendant stations, foot switches, and rotary cam switches, 2 position, 3 position selector switches. Replaces Digest 177 section 19; 0100CT1501_SEC-19CADFormatSizeAdd to My DocumentsCertificateFormatSizeAdd to My DocumentsSize pdfSize 163.3 KBDate 5/23/19DescriptionIECEE CB SCHEME Certificate XB4B, XB4F, ZB4B, ZB4F, ZB4S, XB5A, XB5F, XB5EV, ZALV, ZB5A, ZB5C, ZB5F, ZB5S, ZBE, ZBP, ZBV, ZBW, ZBY, ZBZ, ZENL, ZB2BE, XD4P, ZD4P, ZD5P, all models followed by additional suffixes.Instruction SheetFormatSizeAdd to My DocumentsEU RoHS DeclarationFormatSizeAdd to My DocumentsMarine certificateFormatSizeAdd to My DocumentsProduct Environmental ProfileFormatSizeAdd to My DocumentsREACh DeclarationFormatSizeAdd to My Documents
- All Languages22
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Mounting and ClearancePanel Cut-out for Pushbuttons, Switches and Pilot Lights (Finished Holes, Ready for Installation)
Connection by Screw Clamp Terminals or Plug-in Connectors or on Printed Circuit Board
Connection by Faston Connectors(1)Diameter on finished panel or support(2)40 mm min. / 1.57 in. min.(3)30 mm min. / 1.18 in. min.(4)Ø 22.5 mm / 0.89 in. recommended (Ø 22.3 mm 0+0.4 / 0.88 in. 0+0.016)(5)45 mm min. / 1.78 in. min.(6)32 mm min. / 1.26 in. min.Pushbuttons, Switches and Pilot Lights for Printed Circuit Board ConnectionPanel Cut-outs (Viewed from Installer’s Side)A:30 mm min. / 1.18 in. min.B:40 mm min. / 1.57 in. min.Printed Circuit Board Cut-outs (Viewed from Electrical Block Side)
Dimensions in mmA:30 mm min.B:40 mm min.
Dimensions in in.A:1.18 in. min.B:1.57 in. min.General Tolerances of the Panel and Printed Circuit Board
The cumulative tolerance must not exceed 0.3 mm / 0.012 in: T1 + T2 = 0.3 mm max.Installation Precautions
Minimum thickness of circuit board: 1.6 mm / 0.06 in.
Cut-out diameter: 22.4 mm ± 0.1 / 0.88 in. ± 0.004
Orientation of body/fixing collar ZB4 BZ009: ± 2°30’ (excluding cut-outs marked a and b).
Tightening torque of screws ZBZ 006: 0.6 N.m (5.3 lbf.in) max.
Allow for one ZB4 BZ079 fixing collar/pillar and its fixing screws:
every 90 mm / 3.54 in. horizontally (X), and 120 mm / 4.72 in. vertically (Y).
with each selector switch head (ZB4 BD•, ZB4 BJ•, ZB4 BG•).
The fixing centers marked a and b are diagonally opposed and must align with those marked 4 and 5.(1)Panel(2)Printed circuit boardMounting of Adapter (Socket) ZBZ 01•
1 2 elongated holes for ZBZ 006 screw access
2 1 hole Ø 2.4 mm ± 0.05 / 0.09 in. ± 0.002 for centring adapter ZBZ 01•
3 8 × Ø 1.2 mm / 0.05 in. holes
4 1 hole Ø 2.9 mm ± 0.05 / 0.11 in. ± 0.002, for aligning the printed circuit board (with cut-out marked a)
5 1 elongated hole for aligning the printed circuit board (with cut-out marked b)
6 4 holes Ø 2.4 mm / 0.09 in. for clipping in adapter ZBZ 01•
Dimensions An + 18.1 relate to the Ø 2.4 mm ± 0.05 / 0.09 in. ± 0.002 holes for centring adapter ZBZ 01•.
Technical DescriptionElectrical Composition Corresponding to Code C3Electrical Composition Corresponding to Code C4Electrical Composition Corresponding to Codes C14, SF2 and SR2Electrical Composition Corresponding to Codes M1 and M7Electrical Composition Corresponding to Codes M2 and M8Electrical Composition Corresponding to Codes M6 and P2Electrical Composition Corresponding to Codes M5, M10, MF1, MR1 and MF2Legend