white flush/red projecting/white flush triple-headed pushbutton Ø22 with markingShow more characteristics
Product availabilityNon-Stock - Not normally stocked in distribution facility
Main range of productHarmony XB4 product or component typeHead for triple-headed push-button device short nameZB4 bezel materialBlack metal mounting diameter0.87 in (22 mm) sale per indivisible quantity1 head typeStandard shape of signaling unit headRectangular type of operatorspring return operator profile2 flush - 1 central projecting STOP push-buttons operators descriptionWhite ''up arrow'' - white ''down arrow'' - red ''STOP'' Complementary net weight0.12 lb(US) (0.056 kg) resistance to high pressure washer1015.26 psi (7000000 Pa) 131 °F (55 °C) 0.1 m colour of markingBlack marking when white capsWhite marking when green, red or black caps operator profileRed projecting, STOP white)White flush, down arrow black)White flush, up arrow black) mechanical durability1000000 cycles electrical composition codeC1 9 single front mountingC2 9 single and double front mountingC11 3 single front mounting device presentationBasic element Environment ambient air temperature for storage-40…158 °F (-40…70 °C) ambient air temperature for operation-13…158 °F (-25…70 °C) electrical shock protection classClass I IEC 60536 IP degree of protectionIP69 IEC 60529IP69K IEC 60529 NEMA degree of protectionNEMA 13NEMA 4X IK degree of protectionIK06 IEC 50102 standardsEN/IEC 60947-5-4EN/IEC 60947-1JIS C8201-5-1EN/IEC 60947-5-5CSA C22.2 No 14UL 508EN/IEC 60947-5-1JIS C8201-1 product certificationsRINALROS (Lloyds register of shipping)GLUL ListedBVCSADNV vibration resistance5 gn 2…500 Hz)IEC 60068-2-6 shock resistance30 gn 18 ms) half sine wave acceleration IEC 60068-2-2750 gn 11 ms) half sine wave acceleration IEC 60068-2-27 Ordering and shipping details Category22468 - PUSHBUTTONS,22MM(METAL) NEW Discount ScheduleCS2 GTIN03389119044103 Nbr. of units in pkg.1 Package weight(Lbs)0.12 lb(US) (0.05 kg) ReturnabilityNo Country of originFR Packing Units Unit Type of Package 1PCE Package 1 Height1.77 in (4.5 cm) Package 1 width1.30 in (3.3 cm) Package 1 Length2.09 in (5.3 cm) Offer Sustainability Sustainable offer statusGreen Premium product REACh free of SVHCYes EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Toxic heavy metal freeYes Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity Profile Contractual warranty Warranty18 months
CertificateFormatSizeDateAdd to My DocumentsChina RoHS declarationFormatSizeDateAdd to My DocumentsEnd of Life InformationFormatSizeDateAdd to My DocumentsEU RoHS DeclarationFormatSizeDateAdd to My DocumentsMarine certificateFormatSizeDateAdd to My Documents
- All Languages9
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsDimensionsWithout BootWith Boot ZBA709
Mounting and ClearancePanel Cut-out for Pushbuttons, Switches and Pilot Lights (Finished Holes, Ready for Installation)
Connection by Screw Clamp Terminals or Plug-in Connectors or on Printed Circuit Board
Connection by Faston Connectors(1)Diameter on finished panel or support(2)40 mm min. / 1.57 in. min.(3)30 mm min. / 1.18 in. min.(4)Ø 22.5 mm / 0.89 in. recommended (Ø 22.3 mm 0+0.4 / 0.88 in. 0+0.016)(5)45 mm min. / 1.78 in. min.(6)32 mm min. / 1.26 in. min.Pushbuttons, Switches and Pilot Lights for Printed Circuit Board ConnectionPanel Cut-outs (Viewed from Installer’s Side)A:30 mm min. / 1.18 in. min.B:40 mm min. / 1.57 in. min.Printed Circuit Board Cut-outs (Viewed from Electrical Block Side)
Dimensions in mmA:30 mm min.B:40 mm min.
Dimensions in in.A:1.18 in. min.B:1.57 in. min.General Tolerances of the Panel and Printed Circuit Board
The cumulative tolerance must not exceed 0.3 mm / 0.012 in: T1 + T2 = 0.3 mm max.Installation Precautions
Minimum thickness of circuit board: 1.6 mm / 0.06 in.
Cut-out diameter: 22.4 mm ± 0.1 / 0.88 in. ± 0.004
Orientation of body/fixing collar ZB4 BZ009: ± 2°30’ (excluding cut-outs marked a and b).
Tightening torque of screws ZBZ 006: 0.6 N.m (5.3 lbf.in) max.
Allow for one ZB4 BZ079 fixing collar/pillar and its fixing screws:
every 90 mm / 3.54 in. horizontally (X), and 120 mm / 4.72 in. vertically (Y).
with each selector switch head (ZB4 BD•, ZB4 BJ•, ZB4 BG•).
The fixing centers marked a and b are diagonally opposed and must align with those marked 4 and 5.(1)Panel(2)Printed circuit boardMounting of Adapter (Socket) ZBZ 01•
1 2 elongated holes for ZBZ 006 screw access
2 1 hole Ø 2.4 mm ± 0.05 / 0.09 in. ± 0.002 for centring adapter ZBZ 01•
3 8 × Ø 1.2 mm / 0.05 in. holes
4 1 hole Ø 2.9 mm ± 0.05 / 0.11 in. ± 0.002, for aligning the printed circuit board (with cut-out marked a)
5 1 elongated hole for aligning the printed circuit board (with cut-out marked b)
6 4 holes Ø 2.4 mm / 0.09 in. for clipping in adapter ZBZ 01•
Dimensions An + 18.1 relate to the Ø 2.4 mm ± 0.05 / 0.09 in. ± 0.002 holes for centring adapter ZBZ 01•.
Technical DescriptionElectrical Composition Corresponding to Code C1Electrical Composition Corresponding to Code C2Electrical Composition Corresponding to Codes C9, C11, SF1 and SR1Legend