View all
Harmony XB4/ZB4 Metal Push Buttons
ZB4BS14147
ZB4BS14147
red Ø40 Emergency switching off pushbutton head Ø22 latching key release
Show more characteristics-
Characteristics
Main range of product Harmony XB4product or component type Head for emergency switching off push-buttondevice short name ZB4bezel material Black metalmounting diameter 0.87 in (22 mm)sale per indivisible quantity 1shape of signaling unit head Roundtype of operator mechanical latchingreset Key releaseoperator profile Red mushroom Ø 40 mm, unmarkedtype of keylock Ronis 520Ekey withdrawal position Centerhead type StandardComplementary CAD overall width 1.57 in (40 mm)CAD overall height 1.57 in (40 mm)CAD overall depth 3.11 in (79 mm)net weight 0.15 lb(US) (0.07 kg)resistance to high pressure washer 1015.26 psi (7000000 Pa) 131 °F (55 °C) 0.1 mmechanical durability 300000 cycleselectrical composition code C7 4 single front mountingC8 4 single and double front mountingC11 3 single front mountingC15 1 single front mountingC10 4 single and double front mountingEnvironment protective treatment THambient air temperature for storage -40…158 °F (-40…70 °C)ambient air temperature for operation -40…158 °F (-40…70 °C)electrical shock protection class Class I IEC 61140IP degree of protection IP66 IEC 60529IP67IP69IP69KNEMA degree of protection NEMA 13NEMA 4XNEMA 4NEMA 12IK degree of protection IK03 IEC 50102standards JIS C8201-5-1GB 14048.5EN/IEC 60947-5-4IEC 60364-5-53EN/IEC 60947-5-1EN/IEC 60947-1CSA C22.2 No 14UL 508JIS C8201-1product certifications BVGLUL listedLROS (Lloyds register of shipping)DNVCSARINAvibration resistance 5 gn 2…500 Hz)IEC 60068-2-6shock resistance 30 gn 18 ms) half sine wave acceleration IEC 60068-2-2750 gn 11 ms) half sine wave acceleration IEC 60068-2-27Ordering and shipping details GTIN 03389110826098Package weight(Lbs) 0.17 lb(US) (0.077 kg)Offer Sustainability Sustainable offer status Green Premium productCalifornia proposition 65 WARNING: This product can expose you to chemicals including: Nickel compounds and Di-isodecyl phthalate (DIDP) which is known to the State of California to cause Carcinogen and Reproductive harm. For more information go to www.p65warnings.ca.govREACh Regulation REACh free of SVHC YesEU RoHS Directive Pro-active compliance (Product out of EU RoHS legal scope)
EU RoHS DeclarationToxic heavy metal free YesMercury free YesRoHS exemption information China RoHS Regulation Environmental Disclosure Circularity Profile Contractual warranty Warranty 18 months -
View more
Documents
Language- English3
EU RoHS DeclarationFormatSizeDateAdd to My DocumentsZB4BS14147_ROHS_DECLARATIONDescriptionZB4BS14147_ROHS_DECLARATIONSize pdfSize 195.3 KBDate 12/14/19DescriptionZB4BS14147_ROHS_DECLARATIONREACh DeclarationFormatSizeDateAdd to My DocumentsZB4BS14147_REACH_DECLARATIONDescriptionZB4BS14147_REACH_DECLARATIONSize pdfSize 195.3 KBDate 12/14/19DescriptionZB4BS14147_REACH_DECLARATIONChina RoHS declarationFormatSizeDateAdd to My DocumentsZB4BS14147_ROHS_CHINA_DECLARATIONDescriptionZB4BS14147_ROHS_CHINA_DECLARATIONSize pdfSize 195.3 KBDate 12/14/19DescriptionZB4BS14147_ROHS_CHINA_DECLARATION -
Technical FAQs
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later. -
Dimensions Drawings
Dimensions
-
Mounting and Clearance
Panel Cut-out for Pushbuttons, Switches and Pilot Lights (Finished Holes, Ready for Installation)Connection by Screw Clamp Terminals or Plug-in Connectors or on Printed Circuit Board
Connection by Faston Connectors
(1)Diameter on finished panel or support(2)40 mm min. / 1.57 in. min.(3)30 mm min. / 1.18 in. min.(4)Ø 22.5 mm / 0.89 in. recommended (Ø 22.3 mm 0+0.4 / 0.88 in. 0+0.016)(5)45 mm min. / 1.78 in. min.(6)32 mm min. / 1.26 in. min.Pushbuttons, Switches and Pilot Lights for Printed Circuit Board ConnectionPanel Cut-outs (Viewed from Installer’s Side)
A:30 mm min. / 1.18 in. min.B:40 mm min. / 1.57 in. min.Printed Circuit Board Cut-outs (Viewed from Electrical Block Side)Dimensions in mm
A:30 mm min.B:40 mm min.Dimensions in in.
A:1.18 in. min.B:1.57 in. min.General Tolerances of the Panel and Printed Circuit BoardThe cumulative tolerance must not exceed 0.3 mm / 0.012 in: T1 + T2 = 0.3 mm max.
Installation PrecautionsMinimum thickness of circuit board: 1.6 mm / 0.06 in.
Cut-out diameter: 22.4 mm ± 0.1 / 0.88 in. ± 0.004
Orientation of body/fixing collar ZB4 BZ009: ± 2°30’ (excluding cut-outs marked a and b).
Tightening torque of screws ZBZ 006: 0.6 N.m (5.3 lbf.in) max.
Allow for one ZB4 BZ079 fixing collar/pillar and its fixing screws:
every 90 mm / 3.54 in. horizontally (X), and 120 mm / 4.72 in. vertically (Y).
with each selector switch head (ZB4 BD•, ZB4 BJ•, ZB4 BG•).
The fixing centers marked a and b are diagonally opposed and must align with those marked 4 and 5.
(1)Panel(2)Printed circuit boardMounting of Adapter (Socket) ZBZ 01•1 2 elongated holes for ZBZ 006 screw access
2 1 hole Ø 2.4 mm ± 0.05 / 0.09 in. ± 0.002 for centring adapter ZBZ 01•
3 8 × Ø 1.2 mm / 0.05 in. holes
4 1 hole Ø 2.9 mm ± 0.05 / 0.11 in. ± 0.002, for aligning the printed circuit board (with cut-out marked a)
5 1 elongated hole for aligning the printed circuit board (with cut-out marked b)
6 4 holes Ø 2.4 mm / 0.09 in. for clipping in adapter ZBZ 01•
Dimensions An + 18.1 relate to the Ø 2.4 mm ± 0.05 / 0.09 in. ± 0.002 holes for centring adapter ZBZ 01•.
-
Technical Description
Electrical Composition Corresponding to Code C7
Electrical Compositions Corresponding to Code C8
Electrical Compositions Corresponding to Code C10
Electrical Composition Corresponding to Codes C9, C11, SF1 and SR1
Electrical Composition Corresponding to Code C151 N/O
1 N/C
1 N/O + N/C or 1 N/O + N/O or 1 N/C + N/C
LegendSingle contact
Double contact
Light block
Possible location
