selector switch head Ø22 3-position stay put Ronis 455Show more characteristics
Product availabilityNon-Stock - Not normally stocked in distribution facility
Main range of productHarmony XB5 product or component typeHead for key selector switch device short nameZB5 bezel materialDark grey plastic mounting diameter0.87 in (22 mm) head typeStandard sale per indivisible quantity1 shape of signaling unit headRound type of operatorstay put operator profileBlack key switch operator position information3 positions +/- 45° type of keylockRonis 455 key withdrawal positionRight Complementary CAD overall width1.14 in (29 mm) CAD overall height1.14 in (29 mm) CAD overall depth2.83 in (72 mm) Net Weight0.13 lb(US) (0.057 kg) mechanical durability1000000 cycles station nameXALD 1...5 cut-outsXALK 2...5 cut-outs electrical composition codeC4 6 single and double front mountingC5 5 single front mountingC6 5 single and double front mountingC7 4 single front mountingC8 4 single and double front mountingC11 3 single front mountingC3 6 single front mountingSF1 3 single front mountingSR1 3 single rear mounting device presentationBasic element Environment protective treatmentTH ambient air temperature for storage-40…158 °F (-40…70 °C) ambient air temperature for operation-40…158 °F (-40…70 °C) overvoltage categoryClass II IEC 60536 IP degree of protectionIP66 IEC 60529IP67IP69IP69K NEMA degree of protectionNEMA 13NEMA 4X resistance to high pressure washer1015.26 psi (7000000 Pa) 131 °F (55 °C) 0.1 m IK degree of protectionIK06 IEC 50102 standardsCSA C22.2 No 14JIS C8201-5-1EN/IEC 60947-1EN/IEC 60947-5-4EN/IEC 60947-5-1UL 508JIS C8201-1 product certificationsLROS (Lloyds register of shipping)RINACSADNVUL ListedBVGL vibration resistance5 gn 2…500 Hz)IEC 60068-2-6 shock resistance30 gn 18 ms) half sine wave acceleration IEC 60068-2-2750 gn 11 ms) half sine wave acceleration IEC 60068-2-27 Ordering and shipping details Category22467 - PUSHBUTTONS,22MM(PLASTIC) NEW Discount ScheduleCS2 GTIN00785901386094 Nbr. of units in pkg.1 Package weight(Lbs)0.1 lb(US) (0.05 kg) ReturnabilityNo Country of originFR Packing Units Package 1 Height0.880 dm Package 1 width0.340 dm Package 1 Length0.540 dm Offer Sustainability Sustainable offer statusGreen Premium product EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity Profile Contractual warranty Warranty18 months
CatalogFormatSizeAdd to My DocumentsCADFormatSizeAdd to My Documentsprp.document.label.format zipSize 200.5 KBDate 5/11/20prp.document.label.format zipSize 156.4 KBDate 1/13/05CertificateFormatSizeAdd to My DocumentsInstruction SheetFormatSizeAdd to My DocumentsChina RoHS declarationFormatSizeAdd to My DocumentsDeclaration of conformityFormatSizeAdd to My DocumentsDimensions drawingFormatSizeAdd to My DocumentsEnd of Life InformationFormatSizeAdd to My DocumentsEU RoHS DeclarationFormatSizeAdd to My DocumentsProduct Environmental ProfileFormatSizeAdd to My Documents
- All Languages23
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Mounting and ClearancePanel Cut-out for Pushbuttons, Switches and Pilot Lights (Finished Holes, Ready for Installation)Connection by Screw Clamp Terminals or Plug-in Connectors or on Printed Circuit Board(1)Diameter on finished panel or support(2)For selector switches and Emergency stop buttons, use of an anti-rotation plate type ZB5AZ902 is recommended.(3)Ø22.5 mm recommended (Ø22.3 0+0.4) / Ø0.89 in. recommended (Ø0.88 in. 0+0.016)
a in mm
a in in.
b in mm
b in in.
By screw clamp terminals or plug-in connector
By Faston connectors
On printed circuit board
1.18Detail of Lug Recess(1)Diameter on finished panel or support(2)For selector switches and Emergency stop buttons, use of an anti-rotation plate type ZB5AZ902 is recommended.(3)Ø22.5 mm recommended (Ø22.3 0+0.4) / Ø0.89 in. recommended (Ø0.88 in. 0+0.016)Pushbuttons, Switches and Pilot Lights for Printed Circuit Board ConnectionPanel Cut-outs (Viewed from Installer’s Side)A:30 mm min. / 1.18 in. min.B:40 mm min. / 1.57 in. min.Printed Circuit Board Cut-outs (Viewed from Electrical Block Side)
Dimensions in mmA:30 mm min.B:40 mm min.
Dimensions in in.A:1.18 in. min.B:1.57 in. min.General Tolerances of the Panel and Printed Circuit Board
The cumulative tolerance must not exceed 0.3 mm / 0.012 in.: T1 + T2 = 0.3 mm max.Installation Precautions
Minimum thickness of circuit board: 1.6 mm / 0.06 in.
Cut-out diameter: 22.4 mm ± 0.1 / 0.88 in. ± 0.004
Orientation of body/fixing collar ZB5AZ009: ± 2°30’ (excluding cut-outs marked a and b).
Tightening torque of screws ZBZ006: 0.6 N.m (5.3 lbf.in) max.
Allow for one ZB5AZ079 fixing collar/pillar and its fixing screws:
every 90 mm / 3.54 in. horizontally (X), and 120 mm / 4.72 in. vertically (Y).
with each selector switch head (ZB5AD•, ZB5AJ•, ZB5AG•).
The fixing centers marked a and b are diagonally opposed and must align with those marked 4 and 5.