green pilot light head ø22 plain lens for ba9s bulbShow more characteristics
Product availabilityStock - Normally stocked in distribution facility
Main range of productHarmony XB5 product or component typeHead for pilot light product compatibilityBA 9s device short nameZB5 bezel materialDark grey plastic mounting diameter0.87 in (22 mm) head typeStandard sale per indivisible quantity1 shape of signaling unit headRound cap/operator or lens colourGreen operator additional informationWith plain lens Complementary CAD overall width1.14 in (29 mm) CAD overall height1.14 in (29 mm) CAD overall depth1.22 in (31 mm) net weight0.04 lb(US) (0.018 kg) station nameXALD 1...5 cut-outsXALK 2...5 cut-outs electrical composition codeP3 front mounting BA 9sP4 front mounting BA 9s and transformerPF2 front mounting BA 9s device presentationBasic element Environment protective treatmentTH ambient air temperature for storage-40…158 °F (-40…70 °C) ambient air temperature for operation-40…158 °F (-40…70 °C) overvoltage categoryClass II IEC 60536 IP degree of protectionIP66 IEC 60529IP67 IEC 60529IP69 IEC 60529IP69K ISO 20653 NEMA degree of protectionNEMA 13NEMA 4X resistance to high pressure washer1015.26 psi (7000000 Pa) 131 °F (55 °C) 0.1 m IK degree of protectionIK05 IEC 50102 standardsEN/IEC 60947-5-4JIS C8201-5-1EN/IEC 60947-1CSA C22.2 No 14EN/IEC 60947-5-1EN/IEC 60947-5-5UL 508JIS C8201-1 vibration resistance5 gn 2…500 Hz)IEC 60068-2-6 shock resistance30 gn 18 ms) half sine wave acceleration IEC 60068-2-2750 gn 11 ms) half sine wave acceleration IEC 60068-2-27 Ordering and shipping details Category22467 - PUSHBUTTONS,22MM(PLASTIC) NEW Discount ScheduleCS2 GTIN00785901355106 Package weight(Lbs)0.01 kg (0.03 lb(US)) ReturnabilityYes Country of originFR Offer Sustainability Sustainable offer statusGreen Premium product California proposition 65WARNING: This product can expose you to chemicals including: Lead and lead compounds which is known to the State of California to cause Carcinogen & Reproductive harm. For more information go to www.p65warnings.ca.gov REACh Regulation REACh free of SVHCYes EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity Profile Contractual warranty Warranty18 months
CatalogFormatSizeAdd to My DocumentsSize pdfSize 8.6 MBDate 5/12/19DescriptionSection 19 of Digest 178 Catalog includes selection and ordering information for push buttons and operator interface equipment. 16mm XB6 XB6E, 22mm XB4 XB5 XB5R XB4R XB7, 30 mm push buttons, pendant stations, foot switches, and rotary cam switches, 2 position, 3 position selector switches. Replaces Digest 177 section 19; 0100CT1501_SEC-19CADFormatSizeAdd to My DocumentsCertificateFormatSizeAdd to My DocumentsSize pdfSize 163.3 KBDate 5/23/19DescriptionIECEE CB SCHEME Certificate XB4B, XB4F, ZB4B, ZB4F, ZB4S, XB5A, XB5F, XB5EV, ZALV, ZB5A, ZB5C, ZB5F, ZB5S, ZBE, ZBP, ZBV, ZBW, ZBY, ZBZ, ZENL, ZB2BE, XD4P, ZD4P, ZD5P, all models followed by additional suffixes.Instruction SheetFormatSizeAdd to My DocumentsEU RoHS DeclarationFormatSizeAdd to My DocumentsProduct Environmental ProfileFormatSizeAdd to My DocumentsREACh DeclarationFormatSizeAdd to My DocumentsRoHs China DeclarationFormatSizeAdd to My Documents
- All Languages18
Technical FAQsNo results found.
Mounting and ClearancePanel Cut-out for Pushbuttons, Switches and Pilot Lights (Finished Holes, Ready for Installation)Connection by Screw Clamp Terminals or Plug-in Connectors or on Printed Circuit Board(1)Diameter on finished panel or support(2)For selector switches and Emergency stop buttons, use of an anti-rotation plate type ZB5AZ902 is recommended.(3)Ø22.5 mm recommended (Ø22.3 0+0.4) / Ø0.89 in. recommended (Ø0.88 in. 0+0.016)
a in mm
a in in.
b in mm
b in in.
By screw clamp terminals or plug-in connector
By Faston connectors
On printed circuit board
1.18Detail of Lug Recess(1)Diameter on finished panel or support(2)For selector switches and Emergency stop buttons, use of an anti-rotation plate type ZB5AZ902 is recommended.(3)Ø22.5 mm recommended (Ø22.3 0+0.4) / Ø0.89 in. recommended (Ø0.88 in. 0+0.016)Pushbuttons, Switches and Pilot Lights for Printed Circuit Board ConnectionPanel Cut-outs (Viewed from Installer’s Side)A:30 mm min. / 1.18 in. min.B:40 mm min. / 1.57 in. min.Printed Circuit Board Cut-outs (Viewed from Electrical Block Side)
Dimensions in mmA:30 mm min.B:40 mm min.
Dimensions in in.A:1.18 in. min.B:1.57 in. min.General Tolerances of the Panel and Printed Circuit Board
The cumulative tolerance must not exceed 0.3 mm / 0.012 in.: T1 + T2 = 0.3 mm max.Installation Precautions
Minimum thickness of circuit board: 1.6 mm / 0.06 in.
Cut-out diameter: 22.4 mm ± 0.1 / 0.88 in. ± 0.004
Orientation of body/fixing collar ZB5AZ009: ± 2°30’ (excluding cut-outs marked a and b).
Tightening torque of screws ZBZ006: 0.6 N.m (5.3 lbf.in) max.
Allow for one ZB5AZ079 fixing collar/pillar and its fixing screws:
every 90 mm / 3.54 in. horizontally (X), and 120 mm / 4.72 in. vertically (Y).
with each selector switch head (ZB5AD•, ZB5AJ•, ZB5AG•).
The fixing centers marked a and b are diagonally opposed and must align with those marked 4 and 5.(1)Head ZB5AD•(2)Panel(2)Nut(4)Printed circuit boardMounting of Adapter (Socket) ZBZ01•
1 2 elongated holes for ZBZ006 screw access
2 1 hole Ø 2.4 mm ± 0.05 / 0.09 in. ± 0.002 for centring adapter ZBZ01•
3 8 × Ø 1.2 mm / 0.05 in. holes
4 1 hole Ø 2.9 mm ± 0.05 / 0.11 in. ± 0.002, for aligning the printed circuit board (with cut-out marked a)
5 1 elongated hole for aligning the printed circuit board (with cut-out marked b)
6 4 holes Ø 2.4 mm / 0.09 in. for clipping in adapter ZBZ01•
Dimensions An + 18.1 relate to the Ø 2.4 mm ± 0.05 / 0.09 in. ± 0.002 holes for centring adapter ZBZ01•.
Technical DescriptionElectrical Composition Corresponding to Codes P1, P3, PF1, PR1 and PF2
Light blockElectrical Composition Corresponding to Code P4Legend