You are currently viewing the content available in Vietnam. If you are looking for information for another region, please select the correct country from the top-left dropdown in the page and 'Navigate to Browse FAQs' in the Support menu.
Issue:
Is the integrated display active when ModBus Network is attached to ATS48 or ATS22.
Product Line :
Altistart Soft Starters
Environment:
Open style Soft Starters
Cause:
Communication
Resolution:
The ATS48 and ATS22 soft starters have a built in display as part of the soft starter. The RJ-45 port can be used for a remote mounted display keypad or for Modbus network. If the RJ-45 port is used for communications or for remote keypad the local display on the soft starter control board will still operate.
The single available port cannotbe used for both a remote keypad and for Modbus communication unless you add a port expander which allows for 2 Modbus Network Masters. Schneider Electric does not offer and expander, so this would require a 3rd party product. Another option is to monitor the motor using a TeSys T.
Is the integrated display active when ModBus Network is attached to ATS48 or ATS22.
Product Line :
Altistart Soft Starters
Environment:
Open style Soft Starters
Cause:
Communication
Resolution:
The ATS48 and ATS22 soft starters have a built in display as part of the soft starter. The RJ-45 port can be used for a remote mounted display keypad or for Modbus network. If the RJ-45 port is used for communications or for remote keypad the local display on the soft starter control board will still operate.
The single available port cannotbe used for both a remote keypad and for Modbus communication unless you add a port expander which allows for 2 Modbus Network Masters. Schneider Electric does not offer and expander, so this would require a 3rd party product. Another option is to monitor the motor using a TeSys T.
Released for:Schneider Electric Vietnam
