{"searchBar":{"inputPlaceholder":"Search by keyword or ask a question","searchBtn":"Search","error":"Please enter a keyword to search"}}

Welcome to the Schneider Electric Website

Welcome to our website.

Select your location

Welcome the the Schneider Electric French website. It looks like you are located in the United States, would you like to change your location?

Traduisez en francais
{"support":{"yesButton":"Yes","noButton":"No","feedback":{"title":"What can we do to improve?"},"submitButton":"Submit","successMessage":"Thank you for your feedback","title":"Was this helpful?","feedbackPercentLabel":"of people found this helpful","captcha":{"error":"Please check the box"}}}
Search FAQs

Are the APC temperature probes calibrated?


Are APC temperature or humidity probes calibrated?

Product Line
  • Environmental Monitoring Sensors
  • NetBotz Sensors

  • All applications

  • Users may want to attempt to calibrate their probes but he calibration of an APC  probe is assured by design. See below for further information.


The Quality Assurance Test is our final factory test which is a verification of the calibration, but not a calibration. The unit cannot be calibrated; there are no adjustments. We verify it to tighter specs than the published specifications. The verification is only done at one temperature and humidity point, in a stable environment, against a traceable, calibrated laboratory measurement probe. The APC probe is not intended to be a laboratory instrument, it is designed to be adequate for the environmental management of a data center, computer room, wiring closet, etc.


Can't find what you are looking for?

Reach out to our Customer Care team to receive information on technical support, assistance for complaints and more.