{"searchBar":{"inputPlaceholder":"Search by keyword or ask a question","searchBtn":"Search","error":"Please enter a keyword to search"}}

Welcome to the Schneider Electric Website

Welcome to our website.

Select your location

Welcome the the Schneider Electric French website. It looks like you are located in the United States, would you like to change your location?

Traduisez en francais
{"support":{"yesButton":"Yes","noButton":"No","feedback":{"title":"What can we do to improve?"},"submitButton":"Submit","successMessage":"Thank you for your feedback","title":"Was this helpful?","feedbackPercentLabel":"of people found this helpful","captcha":{"error":"Please check the box"}}}
Search FAQs

Preventa XY2C - Tightening torque values of the XY2CE, XY2CED, XY2CH, XY2CJ mounting screws, not delivered with the rope pull switch

For the rope switch pull enclosure fixing, the concerned XY2C* user instructions or instruction sheets provide the following recommended tightening torques for the fixing screws, not supplied with the product. Applied value depends mainly on the support material.
- XY2CH and XY2CE or XY2CED rope pull switches : screws M6, tightening torque = 4 +/-0.5 N.m (Newton x meter) or 35.4 +/-4.4 lbf.in (pound x inch);
- XY2CJ : screws M5, tightening torque = 3 +/-0.6 N.m (Newton x meter) or 26.55 +/- 5.3 lbf.in (pound x inch).
Explore more
Explore more

Can't find what you are looking for?

Reach out to our Customer Care team to receive information on technical support, assistance for complaints and more.