You are currently viewing the content available in Vietnam. If you are looking for information for another region, please select the correct country from the top-left dropdown in the page and 'Navigate to Browse FAQs' in the Support menu.
Issue:
The Micro DC SX ships with clamp-on ferrites. I don't know where they go or how to install them.
Product Line:
Micro DC SX,
Environment:
24U and 48U SX EMEA units only
Cause:
The Micro Data Center SX International units ship with one snap-on ferrite per piece of installed equipment.
Resolution:
Ferrite is installed onto the network communications cable to reduce high frequency RF interference, and is required for 50 Hz operation.
See attachment for installation instructions.
The Micro DC SX ships with clamp-on ferrites. I don't know where they go or how to install them.
Product Line:
Micro DC SX,
Environment:
24U and 48U SX EMEA units only
Cause:
The Micro Data Center SX International units ship with one snap-on ferrite per piece of installed equipment.
Resolution:
Ferrite is installed onto the network communications cable to reduce high frequency RF interference, and is required for 50 Hz operation.
See attachment for installation instructions.
Released for:Schneider Electric Vietnam
