You are currently viewing the content available in Vietnam. If you are looking for information for another region, please select the correct country from the top-left dropdown in the page and 'Navigate to Browse FAQs' in the Support menu.
Issue:
Difference between "pre-ramp" and frequency reference process drives.
Product Line:
Altivar ATV630 and ATV930 drives
Environment:
All
Cause:
HMI will display both which one means what one is HMI freq ref and the other is normal freq ref.
Resolution:
[Pre-Ramp Ref Freq] FrH
Frequency reference before ramp (signed value).
Actual frequency reference linked to the motor regardless of which reference channel has been selected.
This parameter is in read-only mode
VS
Ref Frequency] LFr
Reference frequency.
This parameter only appears if the function has been activated. It is used to change the speed reference
from the remote control. OK does not have to be pressed to activate a change of reference.
Difference between "pre-ramp" and frequency reference process drives.
Product Line:
Altivar ATV630 and ATV930 drives
Environment:
All
Cause:
HMI will display both which one means what one is HMI freq ref and the other is normal freq ref.
Resolution:
[Pre-Ramp Ref Freq] FrH
Frequency reference before ramp (signed value).
Actual frequency reference linked to the motor regardless of which reference channel has been selected.
This parameter is in read-only mode
VS
Ref Frequency] LFr
Reference frequency.
This parameter only appears if the function has been activated. It is used to change the speed reference
from the remote control. OK does not have to be pressed to activate a change of reference.
Released for:Schneider Electric Vietnam
