You are currently viewing the content available in Vietnam. If you are looking for information for another region, please select the correct country from the top-left dropdown in the page and 'Navigate to Browse FAQs' in the Support menu.
Issue:
How to wire a speed pot on ATV630 and ATV930 VFDs.
Product Line:
Altivar 630, Altivar 930
Environment:
All
Cause:
Installation
Resolution:
A speed pot typically has 3 terminals
The center terminal is the wiper (the analog signal), and it should be wired to the desired analog input on the drive (AI1, AI2, AI3).
1st leg is wired to +10Vdc.
3rd leg is wired to COM.
How to wire a speed pot on ATV630 and ATV930 VFDs.
Product Line:
Altivar 630, Altivar 930
Environment:
All
Cause:
Installation
Resolution:
A speed pot typically has 3 terminals
The center terminal is the wiper (the analog signal), and it should be wired to the desired analog input on the drive (AI1, AI2, AI3).
1st leg is wired to +10Vdc.
3rd leg is wired to COM.