limit switch XCKP - M18 steel roller plunger - 1NC+1NO - snap - M12Show more characteristics >
Add to My Products Remove from My Products
The maximum number of products that can be compared is 4
Main range of productOsiSense XC series nameStandard format product or component typeLimit switch device short nameXCKP sensor designCompact body typeFixed head typeM18 plunger head materialPlastic body materialPlastic head materialZamak fixing modeBy the head movement of operating headLinear type of operatorSpring return roller plunger metal type of approachLateral approach, 2 directions number of poles2 contacts type and composition1 NC + 1 NO contact operationSnap action Complementary switch actuationBy 30° cam electrical connectionMale connector M12, 4 pins contacts insulation formZb positive openingWith positive opening minimum force36 N minimum force for tripping10 N maximum actuation speed0.5 m/s repeat accuracy0.1 mm on the tripping points with 1 million operating cycles [Ie] rated operational current3 A at 240 V, AC-15 conforming to EN/IEC 60947-5-1 appendix A0.27 A at 250 V, DC-13 conforming to EN/IEC 60947-5-1 appendix A [Ithe] conventional enclosed thermal current3 A [Ui] rated insulation voltage300 V conforming to UL 508300 V conforming to CSA C22.2 No 14250 V (pollution degree 3) conforming to IEC 60947-1 maximum resistance across terminals25 MOhm conforming to IEC 60255-7 category 3 [Uimp] rated impulse withstand voltage2.5 kV conforming to IEC 606642.5 kV conforming to IEC 60947-1 short-circuit protection4 A cartridge fuse, type gG electrical durability5000000 cycles, DC-13, 120 V, 4 W, operating rate <60 cyc/mn, load factor: 0.5 conforming to IEC 60947-5-1 appendix C5000000 cycles, DC-13, 24 V, 10 W, operating rate <60 cyc/mn, load factor: 0.5 conforming to IEC 60947-5-1 appendix C5000000 cycles, DC-13, 48 V, 7 W, operating rate <60 cyc/mn, load factor: 0.5 conforming to IEC 60947-5-1 appendix C mechanical durability10000000 cycles width31 mm height65 mm depth30 mm terminals description ISO n°1(21-22)NC(13-14)NO Environment shock resistance50 gn for 11 ms conforming to IEC 60068-2-27 vibration resistance25 gn (f= 10…500 Hz) conforming to IEC 60068-2-6 IP degree of protectionIP66 conforming to IEC 60529IP67 conforming to IEC 60529 IK degree of protectionIK04 conforming to EN 50102 electrical shock protection classClass II conforming to IEC 61140Class II conforming to NF C 20-030 ambient air temperature for operation-25…70 °C ambient air temperature for storage-40…70 °C protective treatmentTC product certificationsCCCULCSA standardsEN 60204-1IEC 60947-5-1CSA C22.2 No 14IEC 60204-1UL 508EN 60947-5-1 Offer Sustainability Sustainable offer statusGreen Premium product REACh Regulation EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury freeYes RoHS exemption information Environmental Disclosure Circularity Profile Contractual warranty Warranty18 months
Documents & DownloadsLanguage
CatalogueSizeAdd to My DocumentsCADSizeAdd to My DocumentsCAD file (on TraceParts) for XCKP21H2M12: limit switch XCKP - M18 steel roller plunger - 1NC+1NO - snap - M12 (Version 2.0)Plastic or metal XCK P or XCK D, integral M12 connector, with steel roller plunger (Version 1.1)CertificateSizeAdd to My DocumentsXCKD/P/T..., ZCD/P/T..., XCDR..., XCPR..., XCTR... limit switches and XCSD/P... safety switches (made in France) - Certificate for China compulsory product certification (Version 1.0)XCKD/P/T..., ZCD/P/T..., XCDR..., XCPR..., XCTR... limit switches and XCSD/P... safety switches (made in Indonesia) - Certificate for China compulsory product certification (Version 1.0)Instruction sheetSizeAdd to My DocumentsDeclaration of conformitySizeAdd to My DocumentsEnd of Life InformationSizeAdd to My DocumentsProduct Environmental ProfileSizeAdd to My Documents
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsDimensions(1)2 elongated holes Ø 4.3 x 6.3 mm on 22 mm centres, 2 holes Ø 4.3 on 20 mm centres.(2)2 x Ø 3 holes for support studs, depth 4 mm.(3)Fixing nut thickness 3.5 mm.
Mounting and ClearanceMounting with Cable EntryPosition of Cable Gland(1)Recommended(2)To be avoidedPanel MountingMounting and Fixing Limit Switches by the Head(1)Recommended(2)ForbiddenSetting-upPlunger or Multi-directional Heads
Connections and SchemaWiring Diagram2-pole NC + NO Snap ActionConnectionsM12 Connector1-2 :NC3-4 :NO
Technical DescriptionCharacteristics of ActuationSwitch Actuation by 30° CamFunctionnal Diagram(P)Positive opening point(A)Cam displacement(1)NC contact with positive opening operation(2)Closed(3)Open(4)Tripping(5)Resetting