Issue:
Why is my APC Back-UPS emitting a single beep every 5 seconds?
Product Line:
Back-UPS, Back-UPS PRO
Environment:
N/A
Cause:
The Back-UPS product has transferred to battery power due to a low voltage condition at the wall. The Back-UPS has remained Onbattery until its runtime was totally exhausted, however, there was still enough voltage present at the wall to trickle charge the battery.
Resolution:
This is considered to be a normal operating state.
When the voltage returns to normal the Back-UPS will wake up and restore power to the battery outlets.
Why is my APC Back-UPS emitting a single beep every 5 seconds?
Product Line:
Back-UPS, Back-UPS PRO
Environment:
N/A
Cause:
The Back-UPS product has transferred to battery power due to a low voltage condition at the wall. The Back-UPS has remained Onbattery until its runtime was totally exhausted, however, there was still enough voltage present at the wall to trickle charge the battery.
Resolution:
This is considered to be a normal operating state.
When the voltage returns to normal the Back-UPS will wake up and restore power to the battery outlets.
Đã phát hành cho:Schneider Electric Việt Nam
