Browse FAQs

What are the minimum required clearances for the ATS48 unit for enclosure mounting.

Published date: 19 July 2019

What are the minimum clearances required on the ATS48 soft starters?

Product line:
Altistart 48, ATS48


Mounting inside an enclosure

There is a minimum of 4 inches (100 mm) on the top and bottom of the softstart.  A minimum clearance of 2 inches (50mm) on each sides.
The enclosure must also allow for proper ventilation to maintain a temperature of 40C (104F) and required wire bending space.

Was this helpful?

What can we do to improve the information ?

Can't find what you are looking for?

Reach out to our customer care team to receive information on technical support, assistance for complaints and more.