Browse FAQs

What causes an internal fault on the ATV66 drives?

Published date: 27 June 2019

What causes an internal fault on the ATV66 drives?

Product Line:
Altivar ATV66


The +15vdc and - 15vdc power supplies are below +/- 11.5vdc

Before making any voltage checks make sure you have removed mains voltage from L1 L2 and L3 and install single phase voltage (mains power) into CL1 CL2 minus any jumpers.

Check the +/- 15vdc supplies on J9 connector pins 3, 4 and 5
Pin 4 is 0v
Pin 3 is -15vdc
Pin 4 is +15vdc

if any of these voltages are below +/- 11.5vdc you will get the internal fault code.

Possible problems: can be
LEM's or CT's might be shorting out power supplies
Shorted gate driver boards
Shorted or inoperative power board


Was this helpful?

What can we do to improve the information ?

Can't find what you are looking for?

Reach out to our customer care team to receive information on technical support, assistance for complaints and more.