Browse FAQs

Can the remote keypad of the S-Flex drive be removed without interrupting the drive operations?

Published date: 05 February 2019

Removing the remote keypad with the drive running.

Product Line:
S-Flex ATV212

All models


Under typical Remote mode operation, removing the keypad while the VFD is running the motor will not interrupt the operation of the drive.

Two scenarios that will result in an Err9 fault when the keypad is removed are:
1) if running the VFD in Local mode
2) if the VFD is programmed for PID control and the setpoint source is FMOd=3

Was this helpful?

What can we do to improve the information ?

Can't find what you are looking for?

Reach out to our customer care team to receive information on technical support, assistance for complaints and more.