Modicon M221
Programmable logic controller for hardwired architectures
Part of Modicon
Achieve benchmark performance while increasing profitability with the Modicon M221 PLC, the most complete controller in the new Modicon range
-
See More DocumentsLanguage Format Size Date Catalogue CANopen for Machines (Version 3.0) DescriptionThis catalog contains presentation and reference information as well as a selection guide for CANopen for machines.English pdf 7.8 MB 8/28/19 DescriptionThis catalog contains presentation and reference information as well as a selection guide for CANopen for machines.Industrial Ethernet (Version 4.0) English pdf 4.3 MB 8/28/19 SoMachine Configuration Software (Version 6.0) English pdf 1.7 MB 12/15/17 EcoStruxure Machine Expert - Basic - Logiciel pour contrôleur logique Modicon M221 (Version 1.0) French pdf 5.6 MB 2/1/19 Logiciel de configuration SoMachine (Version 6.0) French pdf 1.8 MB 12/15/17 -
See More SoftwareLanguage Format Size Date Software - Released EcoStruxure Machine Expert-Basic (Version 1.0) Czech, German, English, Spanish, French, Italian, Portuguese, Russian, Turkish, Chinese exe 394.2 MB 7/17/19 SoMachine Basic SP2 (Version 1.6) Czech, German, English, Spanish, French, Italian, Russian, Turkish, Chinese exe 359.8 MB 7/31/18 MSX Configurator (Version 1.0.8.0) Files in documentDescriptionThe MachineStruxure Configurator is a simple to use configuration tool which allows the architecture to be configured using any of the Modicon M221, M241 and M251 controllers and associated TM3 and TM4 I/O offer by simply clicking away. An assistant will guide you when building the architecture and also propose the replacement of existing controller solutions based upon Modicon M238 and Twido to the Modicon M221, M241 and M251 controllers offer.German, English, Spanish, French, Italian, Portuguese, Russian, Turkish, Chinese zip 29.6 MB 6/4/14 Files in documentDescriptionThe MachineStruxure Configurator is a simple to use configuration tool which allows the architecture to be configured using any of the Modicon M221, M241 and M251 controllers and associated TM3 and TM4 I/O offer by simply clicking away. An assistant will guide you when building the architecture and also propose the replacement of existing controller solutions based upon Modicon M238 and Twido to the Modicon M221, M241 and M251 controllers offer.Firmware - Released M221 firmware version V1.3 (Version 1.0) Files in documentDescriptionNew firmware version associated to the new version of SoMachine Basic V1.3English zip 543.4 KB 1/14/15 Files in documentDescriptionNew firmware version associated to the new version of SoMachine Basic V1.3M221 Firmware V1.1.1.5 (Version 1.0) Files in documentDescriptionIn some cases, after power on with a connected Ethernet cable, the controller goes to its run state during 4-5 seconds. Then the application freezes during about 8 seconds. During this period the outputs remain in their current state. Afterwards, the controller reboots and resumes its normal operation. The same behaviour can happen if an Ethernet cable is connected after the controller is powered.The consequence of the 8-second freeze is that the controller stops reading the inputs and the outputs are maintained in their last state.A new firmware version V1.1.1.5 correcting this issue is already available and is compatible with versions V1.1.1.3 or lower of the M221 firmware : it is attached to PRB132768, to Product Info 8371 and is published on the Shopping Kiosk and schneider-electric.com.Two versions of the firmware are provided depending on the method used to upgrade: firmware loader or SD card.English zip 565.7 KB 10/17/14 Files in documentDescriptionIn some cases, after power on with a connected Ethernet cable, the controller goes to its run state during 4-5 seconds. Then the application freezes during about 8 seconds. During this period the outputs remain in their current state. Afterwards, the controller reboots and resumes its normal operation. The same behaviour can happen if an Ethernet cable is connected after the controller is powered.The consequence of the 8-second freeze is that the controller stops reading the inputs and the outputs are maintained in their last state.A new firmware version V1.1.1.5 correcting this issue is already available and is compatible with versions V1.1.1.3 or lower of the M221 firmware : it is attached to PRB132768, to Product Info 8371 and is published on the Shopping Kiosk and schneider-electric.com.Two versions of the firmware are provided depending on the method used to upgrade: firmware loader or SD card.