Acti9 iPRF1, PRD1
Surge arresters Type 1 or Type 1+2
Part of 9 Series
Surge Protection Devices against direct lightning strike
FeaturesActi9 iPRF1, PRD1 Type 1 Surge arresters protect the electrical equipments against the direct lightning strikes.
The installation of Type 1 or Type 1+2 Surge Protection Devices is compulsory whenever there is a lightning rod.
They are tested and rated according to the standardised current wave of 10/350 μs, as in IEC/EN 61643-11:2011.
Impulse discharge current Iimp:
- 12.5 kA for Acti9 iPRF1 12.5r is suitable for buildings with protection levels III and IV
- 25 kA for Acti9 PRD1 25r and 35 kA for Acti9 PRD1 Master are suitable for buildings with protection levels I and II.
To download the Coordination Tables click here
More information about the risks to be avoided at end of life of the SPDs
These Surge arresters are available either as monobloc or with pluggable cartridges.
These ranges cover all the different earthing system: multiple-pole or single-pole devices to be assembled.
They come with ouput contacts for remote transfer of end-of-life information (for Acti9 Smartlink or other input/output devices).
- Acti9 iPRF1 12.5r and Acti9 PRD1 25r are also Type 2 rated (8/20 µs) to protect the electrical equipment by finely clipping the voltage surge
- They are suitable for 230/400 V 50/60 Hz networks, with earthing system TT, TN-S, TN-C
- Acti9 PRD1 Master is also suitable for 440 V IT earthing system.
These two SPD Type 1 ranges provide:
- Powerful Surge Protection for installations and buildings with high lightning strike risk
- Ensure the continuity of service of your installation
- Acti9 PRD1 Surge arresters are fitted with easy-to-replace pluggable cartridges
- Beware the lightning rod is not sufficient as a protection, Type 1 Surge Protection Devices contribute to the safety of your equipments.
ApplicationsActi9 iPRF1, PRD1 Type 1 Surge arresters protect the electrical installations against induced or conducted surges caused by direct lightning strikes.
- The IEC/EN 62305-2 specifies the use of Type 1 or Type 1+2 Surge Protection Devices in commercial and industrial buildings protected by a lightning conductor or a lightning rod
- Surge Protection Devices are recommended when there is higher risk of direct lightning strikes.
EcoStruxure™ for Your BusinessEcoStruxure lets you thrive in today's digital world. Make better business decisions with scalable and converged IT/OT solutions. Learn more
Can’t find what you are looking for?Reach out to our customer team in your country or region if you have any questions or need more details or technical support. Contact support
Frequently Asked QuestionsEasily find and share the answer you are looking for from our online FAQ service Browse FAQ
Need information?Browse our resource section and find the most useful tools and documents for all our products Browse
Energy and sustainability servicesFirst, envision an energy-efficient, cost-effective and sustainable enterprise. Next, discover our energy and sustainability services, including big data management, to turn this vision into your business reality. Browse services
+ Lifecycle ServicesFrom energy and sustainability consulting to optimizing the lifecycle of your assets, we have services to meet your business needs. Discover services