Mounting on 35 mm/1.37 in. or 75 mm/2.95 in. Rail
Main range of productModicon Power Supply product or component typePower supply power supply typeRegulated switch mode Nominal input voltage100...240 V AC phase to phase, terminal(s): L1-L2100...240 V AC single phase, terminal(s): N-L1110...220 V DC input voltage limits85...264 V AC100...250 V AC rated power in W120 W output voltage48 V DC power supply output current2.5 A Complementary input protection typeIntegrated fuse (not interchangeable) inrush current30 A [Ue] rated operational voltage0.98 efficiency85 % Output voltage adjustment100...120 % adjustable power dissipation in W25.4 W current consumption1 A at 100 V0.6 A at 240 V output protection typeAgainst overload, protection technology: 1.1 x InAgainst overvoltage, protection technology: tripping if U > 1.5 x UnAgainst short-circuits, protection technology: manual or automatic resetAgainst undervoltage, protection technology: tripping if U < 0.8 x Un connections - terminalsFor input connection: screw type terminals, connection capacity: 2 x 0.14...2 x 2.5 mm² AWG 26...AWG 14For output connection: screw type terminals, connection capacity: 4 x 0.14...4 x 2.5 mm² AWG 26...AWG 14For input ground connection: screw type terminals, connection capacity: 1 x 0.14...1 x 2.5 mm² AWG 26...AWG 14For output ground connection: screw type terminals, connection capacity: 2 x 0.14...2 x 2.5 mm² AWG 26...AWG 14 status LED1 LED (green)output voltage: 1 LED (orange)input voltage: depth120 mm height120 mm width54 mm net weight1 kg output couplingSeriesParallel markingCE mounting support75 x 7.5 mm symmetrical DIN rail 35 x 7.5 mm symmetrical DIN rail 35 x 15 mm symmetrical DIN rail operating positionVertical Environment standardsUL 508CSA C22.2 No 60950-1 product certificationsCSA 22-2 No 950EACRCMKCUL 508TÜV environmental characteristicEMC conforming to EN 50081-1EMC conforming to EN 50082-2EMC conforming to EN/IEC 61000-6-2Safety conforming to EN/IEC 60950Safety conforming to IEC 61496-1-2Safety conforming to SELV operating altitude2000 m IP degree of protectionIP20 conforming to EN/IEC 60529 ambient air temperature for operation0…50 °C (without)50…60 °C (with derating factor) ambient air temperature for storage-25…70 °C relative humidity0…95 % without condensation or dripping water overvoltage categoryClass I conforming to VDE 0106-1 dielectric strength3000 V between input and ground3000 V between input and output500 V between output and ground500 V between outputs Offer Sustainability Sustainable offer statusGreen Premium product REACh Regulation EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity Profile Contractual warranty Warranty18 months
CatalogueFormatSizeAdd to My DocumentsCertificateFormatSizeAdd to My DocumentsInstruction sheetFormatSizeAdd to My DocumentsChina RoHS declarationFormatSizeAdd to My DocumentsDeclaration of conformityFormatSizeAdd to My DocumentsEnd of Life InformationFormatSizeAdd to My DocumentsEU RoHS DeclarationFormatSizeAdd to My DocumentsProduct Environmental ProfileFormatSizeAdd to My Documents
- All Languages13
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsRegulated Switch Mode Power SupplyDimensions and Mounting
Connections and SchemaRegulated Switch Mode Power SupplyInternal Wiring Diagram(1)FilterRegulated Switch Mode Power SuppliesSeries or Parallel Connection
Series Connection(1)Two Shottky diodes Imin = power supply In and Vmin = 50 V
2 products max.
2 products max.
NOTE: Series or parallel connection is only recommended for products with identical references.
Performance CurvesRegulated Switch Mode Power SuppliesDerating
The ambient temperature is a determining factor that limits the power an electronic power supply can deliver continuously. If the temperature around the electronic components is too high, their life will be significantly reduced.
The nominal ambient temperature for the Optimum range of Phaseo power supplies is 50 °C. Above this temperature, derating is necessary up to a maximum temperature of 60 °C.
The graph below shows the power as a percentage of the nominal power that the power supply can deliver continuously, depending on the ambient temperature.XMaximum operating temperature (°C)(1)ABL 8REM, ABL 7RP mounted vertically
Derating should be considered in extreme operating conditions:
Regulated Switch Mode Power SupplyTemporary Overloads
Intensive operation (output current permanently close to the nominal current, combined with a high ambient temperature)
Output voltage set above 24 Vdc (to compensate for line voltage drops, for example)
Parallel connection to increase the total power