Overview PresentationFree up space and secure power cords between rack-mount PDUs and attached IT equipment with this exclusive easy-to-use cord retention method. While these cords will fit into any standard IEC receptacle or power inlet; the "locking" feature is enabled only when used with APC AP8000 series Rack PDUs or IT equipment with built-in locking receptacles. These locking connectors reduce the probability of accidentally disconnecting cords and dropping loads. Lead timeUsually in Stock Physical cable length0.61 m colourBlack depth4 cm height24 cm net weight0.7 kg width7 cm Input plug standardIEC 60320 C14 number of cables6 Max line current10 A input current limits10 A Output Max current draw10 A number of power socket outlets1 IEC 60320 C13 power cable length0.61 m Conformance product certificationsCSAUL listed Environmental ambient air temperature for operation0…105 °C relative humidity20…80 % operating altitude0...10000 ft ambient air temperature for storage-25…105 °C storage altitude0.00…15240.00 m Packing Units Package 1 Weight0.7 kg Package 1 Height24 cm Package 1 width7 cm Package 1 Length4 cm Number of Units in Package 3540 Offer Sustainability REACh free of SVHCYes EU RoHS DirectiveUnder investigation Lead freeYes Halogen content performanceHalogen free product Contractual warranty Warranty2 years repair or replace
CatalogueFormatSizeDateAdd to My DocumentsUser guideFormatSizeDateAdd to My Documentsprp.document.label.format zipSize 2 MBDate 1/8/14End of Life InformationFormatSizeDateAdd to My DocumentsEU RoHS DeclarationFormatSizeDateAdd to My Documents
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.