ATV11HU29M2E

Altivar 11

Variable speed drive

Simple machine

ATV11

European

With heat sink

Integrated

With

1 phase

200...240 V - 15...10 %

50...60 Hz - 5...5 %

1.5 kW

14.8 A at 230 V, Isc = 1 kA

6.8 A 230 V motor 4 kHz

10.2 A for 60 s

72 W at nominal load

2...16 kHz adjustable
4...16 kHz with derating factor

150 % of nominal motor torque with braking resistor at high inertia
20 % of nominal motor torque without braking resistor at no load
80 % of nominal motor torque with braking resistor at no load

Sensorless flux vector control with PWM type motor control signal

Terminal, clamping capacity: 1.5 mm², AWG 14 (AI1, RA-RC, LI1...LI4, DO)
Terminal, clamping capacity: 1.5 mm², AWG 14 (L1, L2, L3, U, V, W, PA, PC)

Internal supply for logic inputs: 15 V (+/- 15 %) 100 A, protection type: overload and short-circuit protection
Internal supply for reference potentiometer (2.2 to 10 kOhm): 5...5.25 VDC 10 A, protection type: overload and short-circuit protection

Configurable current AI1 4...20 mA 250 Ohm without adding resistor
Configurable voltage AI1 0...5 V 40000 Ohm only with internal supply
Configurable current AI1 0...20 mA 250 Ohm
Configurable voltage AI1 0...10 V 40000 Ohm

AI1: 20 ms analog
LI1...LI4: 20 ms discrete

20 ms DO

DO: +/- 1 % for output
AI: +/- 5 % for input

Assignable Ll1 forward 5000 Ohm 15 V 24 V
Assignable Ll2 reverse 5000 Ohm 15 V 24 V
Assignable Ll3/Ll4 4 preset speeds 5000 Ohm 15 V 24 V

Positive logic (source) (LI1...LI4), < 5 V (state 0), > 11 V (state 1)

Assignable as external voltage DO 30 V max, 30 mA
Assignable as open collector logic output DO 100 Ohm, 50 mA max
Factory set as PWM open collector output DO at 2 kHz 10 mA max
Protected relay logic RA-RC 1 NO
Assignable as internal voltage DO

RA-RC 10 mA at 24 V DC

2 A 250 V AC inductive cos phi = 0.4 7 ms RA-RC
2 A 30 V DC inductive cos phi = 0.4 7 ms RA-RC
5 A 250 V AC resistive cos phi = 1 0 ms RA-RC
5 A 30 V DC resistive cos phi = 1 0 ms RA-RC

Line supply overvoltage: drive
Line supply undervoltage: drive
Overheating protection: drive
Short-circuit between motor phases: drive
Thermal protection: motor
Overcurrent between output phases and earth: drive

Display unit: 0.1 Hz
Analog input: converter A/D, 10 bits

1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to EN/IEC 61000-4-5
Electrical fast transient/burst immunity test level 4 conforming to EN/IEC 61000-4-4
Electrostatic discharge immunity test level 3 conforming to EN/IEC 61000-4-2
Radiated radio-frequency electromagnetic field immunity test level 3 conforming to EN/IEC 61000-4-3

10 m without additional EMC filter from 2 to 16 kHz conforming to EN 55011 class A group 1
10 m without additional EMC filter from 2 to 16 kHz conforming to EN 55022 class A group 1
20 m with additional EMC filter from 2 to 16 kHz conforming to EN 55011 class B
5 m without additional EMC filter from 2 to 12 kHz conforming to EN 55011 class B
5 m without additional EMC filter from 2 to 12 kHz conforming to EN 55022 class B
50 m with additional EMC filter from 2 to 16 kHz conforming to EN 55011 class A group 1

1 gn (f= 13…200 Hz) conforming to EN/IEC 60068-2-6
1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6

15 gn for 11 ms conforming to EN/IEC 60068-2-27

5…93 % without condensation conforming to IEC 60068-2-3
5…93 % without dripping water conforming to IEC 60068-2-3

-10…40 °C without
40…50 °C by removing the protective cover from the top of the drive
50…60 °C by removing the protective cover from the top of the drive with current derating of 2.2 % per °C

<= 1000 m without
> 1000 m with current derating 1 % per 100 m

Asynchronous motors

170…264 V

47.5…63 Hz

0…200 Hz

4 kHz

1…20

150...170 % of nominal motor torque

Possible correction for machines with high resistive torque/inertia/fast cycles
Adjustable frequency
Factory-set with the speed loop stability and gain

Adjustable
Preset in factory

1 kA

<= power supply voltage

Electrical between power and control

1

4

2

Linear from 0 to 99.9 s

By DC injection

> 500 MOhm

CE

Vertical +/- 10 degree

117 mm

142 mm

156 mm

142 x 117 x 156 mm

1.8 kg

EN 50178

UL
N998
C-Tick
CSA

IP20

-25…65 °C

Packaging Conveyor

1.1…2 kW at 200…240 V 1 phase

Variable speed drive

18 months