Main range compatibilityLexium 32i product or component typeServo motor with power stage device short nameBMI Complementary maximum mechanical speed6000 rpm [Us] rated supply voltage208...480 V - 15...10 % supply voltage limits208…480 V network number of phasesThree phase supply frequency50/60 Hz - 5...5 % network frequency limits47.5…63 Hz EMC filterIntegrated continuous output current4 A at 8 kHz output current 3s peak12 A at 400 V for 3 s continuous stall current4 A continuous stall torque6 N.m at 208...480 V three phase peak stall torque14 N.m at 208 V three phase14 N.m at 400 V three phase14 N.m at 480 V three phase nominal output power1000 W at 208 V three phase1900 W at 400 V three phase1900 W at 480 V three phase nominal torque5.1 N.m at 400 V three phase5.4 N.m at 208 V three phase4.1 N.m at 480 V three phase nominal speed1900 rpm at 208 V three phase3800 rpm at 400 V three phase4700 rpm at 480 V three phase maximum current Irms17.5 A at 208 V, three phase17.5 A at 400 V, three phase17.5 A at 480 V, three phase product compatibilityDrive control unit LXM32i CANopenDrive control unit LXM32i EtherCAT shaft endUntapped second shaftWithout second shaft end shaft diameter19 mm shaft length40 mm feedback typeAbsolute single turn SinCos Hiperface speed feedback resolution131072 points/turn holding brakeWithout mounting supportInternational standard flange motor flange size100 mm electrical connectionPrinted circuit board connector torque constant1.28 N.m/A at 20 °C back emf constant84.52 V/krpm at 20 °C number of motor poles10 rotor inertia6.28 kg.cm² stator resistance2.347 Ohm at 20 °C stator inductance9.79 mH at 20 °C stator electrical time constant4.17 ms at 20 °C maximum radial force Fr990 N at 1000 rpm790 N at 2000 rpm690 N at 3000 rpm620 N at 4000 rpm580 N at 5000 rpm maximum axial force Fa0.2 x Fr type of coolingNatural convection length273 mm number of motor stacks2 centring collar diameter95 mm centring collar depth3.5 mm number of mounting holes4 mounting holes diameter9 mm circle diameter of the mounting holes115 mm distance shaft shoulder-flange3.5 mm Environment IP degree of protectionIP65 Offer Sustainability Sustainable offer statusGreen Premium product REACh Regulation EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity Profile WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins Contractual warranty Warranty18 months
CatalogueFormatSizeAdd to My DocumentsUser guideFormatSizeAdd to My Documentsprp.document.label.format pdfSize 10.1 MBDate 3/1/20DescriptionThis manual describes technical characteristics, installation, commissioning, operation and maintenanceof the integrated servo drive system Lexium 32i ETH + BMi.prp.document.label.format pdfSize 11.8 MBDate 3/1/20DescriptionThis manual describes technical characteristics, installation, commissioning, operation and maintenanceof the integrated servo drive system Lexium 32i ECT + BMi.prp.document.label.format pdfSize 11.1 MBDate 3/1/20DescriptionThis manual describes technical characteristics, installation, commissioning, operation and maintenanceof the integrated servo drive system Lexium 32i CAN + BMi.CertificateFormatSizeAdd to My DocumentsChina RoHS declarationFormatSizeAdd to My DocumentsDeclaration of conformityFormatSizeAdd to My DocumentsEnd of Life InformationFormatSizeAdd to My DocumentsEU RoHS DeclarationFormatSizeAdd to My DocumentsProduct Environmental ProfileFormatSizeAdd to My Documents
- All Languages29
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.