Main range of productEcoStruxure Control Expert product or component typeSoftware package languageItalianChineseSpanishEnglishGermanFrench formatDVD-ROM Complementary range compatibilityM580/M340/Pemium/Quantum/Momentum software designationControl Expert DVD software typeSoftware software versionV14.0 software functionEngineering product compatibilityModicon controller Packing Units Unit Type of Package 1PCE Number of Units in Package 11 Package 1 Weight108 g Package 1 Height2 cm Package 1 width14 cm Package 1 Length16.5 cm Unit Type of Package 2S02 Number of Units in Package 228 Package 2 Weight3.215 kg Package 2 Height15 cm Package 2 width30 cm Package 2 Length40 cm
- All Languages2
Software and FirmwareLanguage
Software - Hotfix & PatchFormatSizeDateAdd to My Documentsprp.document.label.format zipSize 811.9 KBDate 7/8/20Files in documentDescriptionDescription of issue or behavior (before installation of ControlExpert_V140_HF0540480R)With EcoStruxure Control Expert V14.0 , “Rebuild All Project” command or “Build Changes” command can lead to an incorrect executable application when this application is using direct addressed data (%Mi, %MWi, %MDi, %MFi, %Si, %SWi, %SDi, %Ii, %IWi, %KWi, %KDi, %KFi) in more than one section.Any controller programmed with EcoStruxure Control Expert V14.0 is affected. In the incorrect executable application, some memory values might not correspond to actual values.The above situation may cause the application to behave incorrectly.Note1: This issue does not happen if no direct addressing data instances are used in the code, or if the build parallelism mechanism is disabled. Note 2: additional details are available in FAQ #FA408743https://www.se.com/ww/en/faqs/FA408743/New behavior after installation of ControlExpert_V140_HF0540480RIn above conditions, the executable application is correct, and application behave correctly.Important information: Build time increase.The duration of “Rebuild All Project” and “Build changes” operations will increase; because ControlExpert_V140_HF0540480R disable the possibility for Control Expert V14 to use computer’s multicore capacity, and Build operations will only use one of the computer’s core processors.prp.document.label.format zipSize 1.4 MBDate 5/15/20Files in documentDescriptionDescription of issue or behavior (before installation of ControlExpert_V141_HF0583313R)When more than 250 Safety I/O Modules are configured on M580 Safety controller, Control Expert will stop working during Build.New behavior after installation of ControlExpert_V141_HF0583313RIn above conditions, Control Expert will run the Build.prp.document.label.format zipSize 59.9 MBDate 4/24/20Files in documentDescriptionDescription of issue or behavior (before installation of ControlExpert_V141_BMENOR2200H)BMENOR2200H cannot be managed in Control Expert V14.1New behavior after installation of ControlExpert_V141_BMENOR2200HBMENOR2200H can be managed in Control Expert V14.1Other updates to install prior to installation of ControlExpert_V141_BMENOR2200H: ControlExpert_V141_HF1
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.